AERMEC GR3 User Manual

13
TIME BAND SETTING
Week mode
Image Procedure to be adopted
Press the SET key, act on the arrow keys until the “Monday”
setting is visualised. With the arrow keys, the days from "Monday"
to "Sunday" will sequentially appear.
Press the screwdriver key to select the day. Thus, the menu for
that day is entered.
Then, act on arrow keys to change START 1 values (at the same
time, STOP 1 values will be also in progress). Confirm with the
screwdriver key to modify only the STOP 1.
With the arrow keys, modify STOP 1 values and provide final
confirmation by pressing the screwdriver key.
The second time band is now visualised. Act on arrow keys to
change START 2 values (at the same time, STOP 2 values will
be also in progress). Confirm with the screwdriver key to modify
only the STOP 2.
With the arrow keys, modify STOP 2 values and provide final
confirmation by pressing the screwdriver key.
The display visualisation will return to the initial "SET SETTING -
Monday". At this stage, it is possible to move the rest of the days
one by one and program the timer with the procedure previously
shown.
SET
C1
C2
R
L
R
SETTING
Monday
SET
C1
C2
R
L
R
SETTING
Monday
SET
C1
C2
R
L
R
START 1 00:00<
STOP 1 00:00
SET
C1
C2
R
L
R
START 1 00:20<
STOP 1 00:20
SET
C1
C2
R
L
R
START 1 00:20
STOP 1 00:50<
SET
C1
C2
R
L
R
START 2 06:00<
STOP 2 06:00
SET
C1
C2
R
L
R
START 2 06:00
STOP 2 06:30<

AERMEC GR3 Specifications

General

Brand	AERMEC
Model	GR3
Category	Chiller Control System
Language	English