EasyManua.ls Logo

AERMEC NRL 0750 - General Warnings and Installation Standards; Installation Standards

AERMEC NRL 0750
56 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
718.01._5280107_02
NRL 0280-0750 °-L / A-E
EN
GENERAL WARNINGS
The units are constructed according to the recognised
technical standards and safety regulations.
They are designed for the production of chilled water
for technical installations.
Any contractual or extracontractual liability of the
Company is excluded for injury/damage to persons,
animals or objects owing to installation, regulation and
maintenance errors or improper use.
All uses not expressly indicated in this manual are
prohibited.

1. The instructions along with all the related
documentation must be given to the user of
the system, who assumes the responsibility to
conserve the instructions so that they are always
at hand in case of need.
2. Read this sheet carefully; the execution of all
works must be performed by qualified staff,
according to Standards in force on this subject in

3. The appliance warranty does not cover the costs
for ladders, scaffolding or other elevation sys-
tems, which may become necessary for carrying
out interventions under warranty.
4. Do not modify or tamper with the heat pump
as dangerous situations can be created and the
manufacturer will not be liable for any damage
caused. The warranty shall be become null and
void if the above-mentioned indications are not
respected.


1. Before beginning any operation, READ THESE
INSTRUCTIONS CAREFULLY AND CARRY OUT
THE SAFETY CHECKS TO AVOID ALL RISKS.
2. All the staff involved must have thorough
knowledge of the operations and any dangers
that may arise at the moment in which the
installation operations are carried out.
 will not assume any responsibility for
damage due to failure to follow these instructions.

The units can be identified through:
- PACKING LABEL
which shows the product identification data.



Tampering, removal, lack of the identification
plate or anything else does not allow the sure
identification of the product and will make any
installation or maintenance operation to be
performed difficult.

Units are equipped with GR3 electronics
(standard remote panel)

5
electronics

1. GENERAL WARNINGS
0280 - 0300 - 0330 L
0350 L
0280 - 0300 E
0330 - 0350 E
0500 - 0550 - 0600 - 0650 A/E
0700 A/E
0750 °/L - A/E

Related product manuals