Need help?Do you have a question about the AERMEC NRP 1250 and is the answer not in the manual?
General| Type | Air-to-Water Heat Pump |
|---|---|
| Cooling Capacity | 27.5 kW |
| Heating Capacity | 29.5 kW |
| Refrigerant | R410A |
| Power Supply | 400V/3Ph/50Hz |
Fundamental safety guidelines for personnel and unit operation.
Safety measures for hydraulic, electrical, and cooling circuits.
Criteria for selecting an appropriate outdoor installation location, avoiding specific conditions.
Required clearances around the unit for single installations for ventilation and maintenance.
Recommended water quality parameters for heat exchangers to prevent damage.
Diagrams illustrating refrigerant flow for 2-pipe systems (cooling and hot water production).
Diagrams illustrating refrigerant flow for 4-pipe systems (cold water and hot water production).
Guidelines for connecting the unit to the main power supply.
Steps and checks required before and during unit start-up.
Safety guidelines and precautions for performing maintenance.
To Next Page
