Need help?Do you have a question about the AERMEC NRP 0550 and is the answer not in the manual?
General| Model | NRP 0550 |
|---|---|
| Category | Heat Pump |
| Refrigerant | R410A |
| Operating Temperature Range Heating | -15°C to 35°C |
| Operating Temperature Range Cooling | +10°C to +46°C |
Details applications and operating modes for 2-pipe system units, covering summer and winter functioning.
Details applications and operating modes for 4-pipe system units, suitable for simultaneous hot/cold water demand.
Shows hydraulic circuit for producing hot water for DHW using two circuits.
Illustrates hydraulic circuit for simultaneous cold water to system and hot water to DHW.
Depicts the hydraulic circuit for producing hot water to system and DHW simultaneously.
Illustrates the hydraulic circuit for producing cold water for the system in 4-pipe setups.
Shows the hydraulic circuit for producing hot water for the system in 4-pipe configurations.
Depicts the hydraulic circuit for simultaneous production of hot and cold water to the system.
Details components within the cooling circuit, including compressors, heat exchangers, and water features.
Explains components like water filters, flow switches, and air vent valves.
Covers safety components like pressure switches, transducers, and control units.
Details the electrical control board, isolation switches, and internal wiring.
Specifies the operational limits and conditions for the unit in cooling mode, referencing diagrams.
Specifies the operational limits and conditions for the unit in heating mode, referencing diagrams.
Details electrical data, cable cross-sections, and connections for various models.
To Next Page
