AERMEC NXW - SET POINT MENU Parameters; Display Current Set Point; Setting Cooling Mode Set Points; Setting Heating Mode Set Points

42
SET POINT menu - Setting the work set points for HEATING mode
Visualisation on unit display Index Display/Parameter
A Set point: Indicates the work temperature.
B
Heating set point 1: indicates the temperature set with which
to make the unit work when hot.
C Heating set 2: NOT USED.
Parameters that can be modified
by the user
SET POINT menu- Displays the set point currently in use
Visualisation on unit display Index Display/Parameter
A Set point: Indicates the work temperature.
B Current set point: indicates the work set point currently in
use on the basis of the envisioned functioning mode.
SET POINT MENU parameters
SET POINT menu - Setting the work set points for COOLING mode
Visualisation on unit display Index Display/Parameter
A Set point: Indicates the work temperature.
B
Cooling set point 1: indicates the temperature set with which
to make the unit work when cold.
C Cooling set 2: NOT USED.
Parameters that can be modified
by the user
B
Setpoint
Heating setpoint 1:
A
C
40.0 C
o
Heating setpoint 2:
--- C
o
B
Setpoint
Courrent setpoint:
A
12.0 C
o
B
Setpoint
Cooling setpoint 1:
A
C
12.0 C
o
Cooling setpoint 2:
--- C
o