AERMEC NXW - INPUTS;OUTPUTS MENU Parameters; High;Low Pressure Transducer Inputs (Circuit 1); Evaporator Inlet;Outlet Temperature Inputs; Condenser Output Temperature Inputs

46
INPUTS/OUTPUTS menu - Condenser OUTPUT temperature analogue inputs
Visualisation on unit display Index Display/Parameter
A Inputs/Outputs: Indicates the state of the different entries/
exits.
B Master: indicates the type of data displayed; the displays can
be:
• Analogue inputs;
• Digital inputs;
• Digital outputs;
C B5: indicates the temperature value of the water in output
from the condenser.
INPUTS/OUTPUTS menu - Evaporator IN/OUT temperature analogue inputs
Visualisation on unit display Index Display/Parameter
A Inputs/Outputs: Indicates the state of the different entries/
exits.
B Master: indicates the type of data displayed; the displays can
be:
• Analogue inputs;
• Digital inputs;
• Digital outputs;
C B3: indicates the temperature value of the water in output
from the evaporator.
D B2: indicates the temperature value of the water in input to
the evaporator.
INPUTS/OUTPUTS menu - HIGH/LOW pressure transducers analogue inputs (circuit 1)
Visualisation on unit display Index Display/Parameter
A Inputs/Outputs: Indicates the state of the different entries/exits.
B Master: indicates the type of data displayed; the displays can be:
• Analogue inputs;
• Digital inputs;
• Digital outputs;
C B1: indicates the value read on the high pressure side of the
cooling circuit indicated. This reading is expressed as a pres-
sure value and a temperature value.
D B2: indicates the value read on the low pressure side of the
cooling circuit indicated. This reading is expressed as a pres-
sure value and a temperature value.
INPUTS/OUTPUTS MENU parameters
B
Input/Output
Master:Analog input
A
C
D
B1= High press.circ.1:
13.6barg
20.1 C
o
B2= Low press.circ.1:
11.8barg
15.4 C
B
Input/Output
Master analog input
A
C
D
B3= Outlet water evap.
temp.:
20.5 C
o
B4= Inlet water evap.
temp.:
16.9 C
B
Input/Output
Master analog input
A
C
B5= Outlet cond.reg.
temp.:
30.0 C
o
INPUTS/OUTPUTS menu - HIGH/LOW pressure transducers analogue inputs (circuit 2)
Visualisation on unit display Index Display/Parameter
A Inputs/Outputs: Indicates the state of the different entries/exits.
B Master: indicates the type of data displayed; the displays can be:
• Analogue inputs;
• Digital inputs;
• Digital outputs;
C B6: indicates the value read on the high pressure side of the
cooling circuit indicated. This reading is expressed as a pres-
sure value and a temperature value.
D B7: indicates the value read on the low pressure side of the
cooling circuit indicated. This reading is expressed as a pres-
sure value and a temperature value.
B
Input/Output
Master:Analog input
A
C
D
B6= High press.circ.2:
23.6barg
40.4 C
o
B7= Low press.circ.2:
5.7barg
-5.9 C
o