Do you have a question about the AERMEC WRL 180 and is the answer not in the manual?
Instructions for receiving and handling the WRL unit upon delivery.
Guidelines for choosing the optimal installation location and ensuring proper clearances.
Connection ports and dimensions for WRL 180-400 cooling-only units.
Connection ports and dimensions for WRL 500-650 cooling-only units.
Connection ports and dimensions for WRLH 180-400 heat pump units.
Connection ports and dimensions for WRLH 500-650 heat pump units.
Connection ports and dimensions for WRL-E 180-400 models.
Procedures for starting up and commissioning the WRL unit.
Detailed instructions for performing routine and extraordinary maintenance.
Instructions for receiving and handling the WRL unit upon delivery.
Guidelines for choosing the optimal installation location and ensuring proper clearances.
Connection ports and dimensions for WRL 180-400 cooling-only units.
Connection ports and dimensions for WRL 500-650 cooling-only units.
Connection ports and dimensions for WRLH 180-400 heat pump units.
Connection ports and dimensions for WRLH 500-650 heat pump units.
Connection ports and dimensions for WRL-E 180-400 models.
Procedures for starting up and commissioning the WRL unit.
Detailed instructions for performing routine and extraordinary maintenance.
| Model | WRL 180 |
|---|---|
| Refrigerant | R410A |
| Category | Heat Pump |
| Power Supply | 400V/3Ph/50Hz |
| Operating Temperature Range (Heating) | -20°C to +35°C |
| Operating Temperature Range (Cooling) | +10 to +48 °C |