Need help?Do you have a question about the AERMEC HBI 080 and is the answer not in the manual?
Introduction to the HBI air-water heat pump, its components, and features.
Explanation of Cooling, Heating, and DHW production modes.
Description of unit functions like Test, Low Noise, and Anti-freeze.
Verifying installation, documentation, unit aspect, piping, and connections.
Steps for pre-heating the compressor and checking system parameters before start-up.
Actions to take before starting the unit, including power checks.
Steps for starting the unit and observing its initial operation.
Common issues, causes, and solutions for unit malfunctions.
Introduction to the HBI air-water heat pump, its components, and features.
Explanation of Cooling, Heating, and DHW production modes.
Description of unit functions like Test, Low Noise, and Anti-freeze.
Verifying installation, documentation, unit aspect, piping, and connections.
Steps for pre-heating the compressor and checking system parameters before start-up.
Actions to take before starting the unit, including power checks.
Steps for starting the unit and observing its initial operation.
Common issues, causes, and solutions for unit malfunctions.
General| Cooling capacity | 23.5 kW |
|---|---|
| Heating capacity | 26.8 kW |
| EER | 2.67 |
| COP | 3.62 |
| Sound power level | 72 dB(A) |
| Refrigerant | R410A |
| Type | Air-to-water heat pump |
| Rated Input Power Heating | 2.3 kW |
| Rated Input Power Cooling | 2.1 kW |
To Next Page
