AERMEC ANK045 H - User Manual

11_11. 6755532_02






Summary

2. CONFIGURATOR

4. PRINCIPLE OF OPERATION DIAGRAMS COOLING

4.6. SAFETY AND CONTROL COMPONENTS

4.7. ELECTRIC COMPONENTS

6. TECHNICAL DATA

COOLING

Technical data for cooling capacity, input power, and flow rates.

HEATING

Technical data for heating capacity, input power, and flow rates.

ELECTRICAL DATA

Provides detailed electrical specifications including voltage, current, and power.

7. OPERATION LIMIT

7.1. COOLING MODE

7.2. HEATING MODE

8. PERFORMANCE AND ABSORPTION THAT DIFFER FROM THE NOMINAL - HEATING MODE

8.1. ANK 030 H (220 V-1-60 Hz) HEATING CAPACITY AND INPUT POWER

Heating performance tables for the ANK 030 H model.

8.2. ANK 045 H (220 V-1-60 Hz) HEATING CAPACITY AND INPUT POWER

8.3. ANK 050 H (220 V-1-60 Hz) HEATING CAPACITY AND INPUT POWER

8.4. ANK 030 H (220 V-1-60 Hz) COOLING CAPACITY AND INPUT POWER

8.5. ANK 045 H (220 V-1-60 Hz) COOLING CAPACITY AND INPUT POWER

8.6. ANK 050 H (220 V-1-60 Hz) COOLING CAPACITY AND INPUT POWER

8.7. ANK 030 HP-HA (220 V-1-60 Hz) HEATING CAPACITY AND INPUT POWER

8.8. ANK 045 HP-HA (220 V-1-60 Hz) HEATING CAPACITY AND INPUT POWER

8.9. ANK 050 HA-HP (220 V-1-60 Hz) HEATING CAPACITY AND INPUT POWER

8.10. ANK 030 HA-HP (220 V-1-60 Hz) COOLING CAPACITY AND INPUT POWER

8.11. ANK 045 HA-HP (220 V-1-60 Hz) COOLING CAPACITY AND INPUT POWER

8.12. ANK 050 HA-HP (220 V-1-60 Hz) COOLING CAPACITY AND INPUT POWER

9. PRESSURE DROP

9.1. SYSTEM SIDE EXCHANGER + PIPING PRESSURE DROP

10. USEFUL STATIC PRESSURES

11. ETHYLENE GLYCOL SOLUTIONS

15. CALIBRATION OF SAFETY AND CONTROL PARAMETERS

15.1. CONTROL PARAMETERS

Covers calibration of operational control parameters like temperatures.

15.2. PROTECTION DEVICE CALIBRATION

Details calibration procedures for safety and protection devices.

16. GENERAL WARNINGS FOR THE INSTALLER

16.2. WARNINGS REGARDING SAFETY AND INSTALLATION STANDARDS

Highlights critical safety and installation standards to ensure proper setup.

17. SELECTION AND PLACE OF INSTALLATION

18. HYDRAULIC CIRCUITS OF PRINCIPLE

18.2. CHYDRAULIC CIRCUIT FOR INTERNAL AND EXTERNAL ANK HP

18.3. CHYDRAULIC CIRCUIT FOR INTERNAL AND EXTERNAL ANK HA

21. DIMENSION (mm)

23. HYDRAULIC CONNECTION

23.1. ΑΝΚ 030-045-050 НА

23.2. ΑΝΚ 030-045-050 Η

24. ELECTRIC CONNECTIONS

24.2. ELECTRIC POWER CONNECTION TO THE ELECTRICAL MAINS

Details the process of connecting the unit to the main power supply.

25. CONTROL AND COMMISSIONING

25.1. PREPARATION FOR COMMISSIONING

Lists essential checks and preparations before commissioning the unit.

25.2. MACHINE COMMISSIONING

Provides step-by-step instructions for commissioning the unit.

26. FUNCTIONING FEATURES

26.6. ANTI-FREEZE ALARM

26.7. WATER FLOW RATE ALARM

27. MAINTENANCE

27.1. HYDRAULIC CIRCUIT

27.2. ELECTRIC CIRCUIT CHECKS

27.3. COOLING CIRCUIT CHECKS

27.6. LOAD PROCEDURE

28. LIST OF CONTROLS FOR THE GUIDED PROCEDURE

How to modify a parameter in the user menu:

How to modify a parameter in the installer menu:

ANOMALY

The chiller does not start-up

Troubleshooting steps when the unit fails to start.

Insufficient yield

The compressor stops due to intervention of the protections

Diagnosing compressor shutdown due to protective mechanisms.

High discharge pressure

Low intake pressure

AERMEC ANK045 H Specifications

General

Brand	AERMEC
Model	ANK045 H
Category	Heat Pump
Language	English