Need help?Do you have a question about the AERMEC ANKI 025 and is the answer not in the manual?
Highlights risks like electric discharge, rotating parts, sharp edges, and high pressure gas.
Advises on safe installation and handling, including PPE and hazardous environments.
Explains visual hazard warnings and required personal protective equipment.
Outlines necessary checks and precautions for connecting the unit to the power supply.
Step-by-step guide on safely connecting the unit to the power supply.
Lists essential safety and connection checks before powering the unit.
Verifies voltage, phase balance, and compressor sump heater operation.
Steps to follow after checks are complete to safely start the unit.
Emphasizes using qualified personnel, appropriate PPE, and performing maintenance with the unit off.
Highlights mechanical, electrical, chemical, fire, and environmental risks.
Warns about hazards from high/low pressure gas and hot/cold surfaces.
Details precautions for working with electrical components, including residual voltage.
Lists general steps for maintenance, including isolation and PPE.
Repeats safety pictograms and PPE for clarity during maintenance.
Lists recommended general maintenance tasks and their frequencies.
Details maintenance checks for the cooling circuit at full load.
Outlines essential checks for compressors, including oil and resistance.
Highlights risks like electric discharge, rotating parts, sharp edges, and high pressure gas.
Advises on safe installation and handling, including PPE and hazardous environments.
Explains visual hazard warnings and required personal protective equipment.
Outlines necessary checks and precautions for connecting the unit to the power supply.
Step-by-step guide on safely connecting the unit to the power supply.
Lists essential safety and connection checks before powering the unit.
Verifies voltage, phase balance, and compressor sump heater operation.
Steps to follow after checks are complete to safely start the unit.
Emphasizes using qualified personnel, appropriate PPE, and performing maintenance with the unit off.
Highlights mechanical, electrical, chemical, fire, and environmental risks.
Warns about hazards from high/low pressure gas and hot/cold surfaces.
Details precautions for working with electrical components, including residual voltage.
Lists general steps for maintenance, including isolation and PPE.
Repeats safety pictograms and PPE for clarity during maintenance.
Lists recommended general maintenance tasks and their frequencies.
Details maintenance checks for the cooling circuit at full load.
Outlines essential checks for compressors, including oil and resistance.
To Next Page
General
