Need help?Do you have a question about the AERMEC ANK045 HP and is the answer not in the manual?
Explains the safety and control components for system protection and operation.
Details the electric control board, wiring, and protection devices.
Technical data for cooling and heating capacity, input power, and pressure drop.
Details electrical specs, EER, COP, compressor, pump, and vessel data.
Lists adjustable control parameters like temperature set points.
Calibration values for safety and protection devices.
Crucial safety warnings for installation personnel and procedures.
Step-by-step instructions for connecting the unit to the main power supply.
Checks and preparations needed before commissioning the unit.
Steps to perform machine commissioning and start-up.
Explanation of anti-freeze and water flow rate alarms for unit protection.
Step-by-step guide for loading refrigerant gas into the circuit.
Guide to accessing and modifying installer menu parameters using the control panel.
Covers common issues like non-start-up, insufficient yield, and noisy operation.
Addresses compressor shutdowns due to protections and abnormal pressure conditions.
To Next Page
General
