EN
11_11. 6755532_02
Some parameters in the moducontrol board
must be set appropriately on the basis of the
type of system in which the unit is installed.
-
staller, are summarised and organised in the
following guided procedures, with which to
correctly set the unit circuit board param
-
eters.
To enter the
key has been pressed the password must be inserted for access
to the various menus. To access the user menu the password is
password use the arrow keys. Once the correct password has
the index of the USER parameter and a string of three charac-
Fig.A
Fig. B
Once the key has been pressed the password must be inserted
for access to the various menus. To access the user menu the
. To modify the value of the password use the
arrow keys. Once the correct password has been inserted, press
-
Fig.A
Fig. B
To Next Page
Loading...
