AERMEC ANK050 H - User Manual

11_11. 6755532_02






Summary

Description and Choice of Unit

Principle of Operation Diagrams Cooling

Cooling Circuit Components

Hydraulic Circuit Standard

Hydraulic Circuit (Configurable Version)

Safety and Control Components

Lists and describes essential safety and control elements of the unit.

Electric Components

Electric Control Board

Technical Data

Operation Limits

Cooling Mode Operation Limits

Defines the operating boundaries for cooling mode.

Heating Mode Operation Limits (ANK 030-045)

Defines the operating boundaries for heating mode on specific models.

Heating Mode Operation Limits (ANK 050)

Defines the operating boundaries for heating mode on specific models.

Performance and Absorption Data (Heating)

ANK 030 H Heating Capacity and Input Power

Heating performance data for ANK 030 H model.

ANK 045 H Heating Capacity and Input Power

Heating performance data for ANK 045 H model.

ANK 050 H Heating Capacity and Input Power

Heating performance data for ANK 050 H model.

ANK 030 H Cooling Capacity and Input Power

Cooling performance data for ANK 030 H model.

ANK 045 H Cooling Capacity and Input Power

Cooling performance data for ANK 045 H model.

ANK 050 H Cooling Capacity and Input Power

Cooling performance data for ANK 050 H model.

ANK 030 HP-HA Heating Capacity and Input Power

Heating performance data for ANK 030 HP-HA model.

ANK 045 HP-HA Heating Capacity and Input Power

Heating performance data for ANK 045 HP-HA model.

ANK 050 HA-HP Heating Capacity and Input Power

Heating performance data for ANK 050 HA-HP model.

ANK 030 HA-HP Cooling Capacity and Input Power

Cooling performance data for ANK 030 HA-HP model.

ANK 045 HA-HP Cooling Capacity and Input Power

Cooling performance data for ANK 045 HA-HP model.

ANK 050 HA-HP Cooling Capacity and Input Power

Cooling performance data for ANK 050 HA-HP model.

Pressure Drop

System Side Exchanger + Piping Pressure Drop

Details pressure drop across the system exchanger and piping.

Filter Pressure Drops

Useful Static Pressures

Ethylene Glycol Solutions

How to Interpret Glycol Curves

Minimum;Maximum System Water Content

Calibration of Safety and Control Parameters

Control Parameters

Protection Device Calibration

General Warnings for the Installer

Safety and Installation Standards Warnings

Crucial safety and installation guidelines for technicians.

Selection and Place of Installation

Minimum Technical Space Requirements

Handling Example and Positioning

Hydraulic Circuits of Principle

Hydraulic Circuit for Internal and External ANK H (Standard)

Hydraulic Circuit for Internal and External ANK HP

Hydraulic Circuit for Internal and External ANK HA

Hydraulic Connection

ANK 030-045-050 HA Hydraulic Connection

ANK 030-045-050 H Hydraulic Connection

Electric Connections

Recommended Electric Cable Section

Electric Power Connection to Mains

Instructions for connecting the unit to the electrical power supply.

Auxiliary Connections (User;Installer)

Remote Control and ON;OFF Connections

Control and Commissioning

Preparation for Commissioning

Machine Commissioning

Season Changeover

Functioning Features

Set Point in Cooling Mode

Set Point in Heating Mode

Compressor Start-Up Delay

Circulation Pump Operation

Fan Speed Control (DCPX Accessory)

Anti-Freeze Alarm

Water Flow Rate Alarm

Maintenance Procedures

Hydraulic Circuit Maintenance

Electric Circuit Checks

Cooling Circuit Checks

Mechanical Checks

Load Procedure

Guided Procedure Controls

AERMEC ANK050 H Specifications

General

Brand	AERMEC
Model	ANK050 H
Category	Heat Pump
Language	English