To Next PageTo Next Page
Need help?Do you have a question about the AERMEC ANK 020-085 H and is the answer not in the manual?
Details the main components of the unit, including cooling, hydraulic, safety, and electric circuits.
Graphical representation of operating limits in cooling mode based on external air and water temperatures.
Graphical representation of operating limits in heating mode based on external air and water temperatures.
Table showing heating capacity and input power for ANK 020 H (230V/1/50Hz) at various water temperatures.
Table showing cooling capacity and input power for ANK 020 H (230V/1/50Hz) at various water temperatures.
Explains how to use graphs to determine glycol percentage and correction coefficients based on temperatures.
Outlines mandatory requirements for qualified technicians and safety checks.
Details the internal and external hydraulic components for the standard ANK H model.
Lists mandatory requirements for electrical connections, including circuit breakers and earth connection.
Provides step-by-step instructions for connecting the unit to the electrical mains.
Outlines preliminary operations and checks before commissioning, including safety and voltage verification.
Details operations for commissioning, including pre-power checks, live unit checks, and machine commissioning steps.
Describes the anti-freeze alarm function, set-point, and automatic resistance activation.
Explains how the water flow rate alarm is managed and its intervention to block the compressor and pump.
General
