AERMEC ANL102Q - User Manual

18.01. 6755441_03
INSTALLATION MANUAL
CHILLERS
REVERSIBLE HEAT PUMPS
CONDENSING UNITS
• EXTERNAL UNITS
• HIGH EFFICIENCY
• HOT WATER PRODUCTION UP TO 50 °C
Aermec
participates in the EUROVENT Programme: LCP.
The products of interest can be found on:
www.eurovent-certification.com
EN
ANL
ANL-H
020-202

AERMEC ANL102Q Specifications

General

Brand	AERMEC
Model	ANL102Q
Category	Heat Pump
Language	English

Summary

GENERAL INSTRUCTIONS FOR THE INSTALLER

SAFETY INSTRUCTIONS AND INSTALLATION STANDARDS

Critical safety guidelines and standards for unit installation and operation.

SELECTION AND POSITION OF INSTALLATION

ELECTRICAL CONNECTIONS

ELECTRICAL POWER SUPPLY CONNECTIONS

CHECKS AND FIRST START-UP

PREPARING FOR FIRST START-UP

Steps to take before initiating the first start-up sequence.

START-UP

Steps for starting the unit, including preliminary checks.

PRELIMINARY CHECKS BEFORE POWERING UP

Essential checks to perform on the unit before applying power.

CHECKS TO BE DONE WHEN POWERED UP

Checks to perform after the unit has been powered on.

FIRST START-UP

Procedure for the initial start-up of the unit after all checks are complete.

CHECKS WITH THE UNIT RUNNING

Checks to perform while the unit is operating, covering various circuits.

CHANGE OF SEASON

Instructions for changing the unit's operating season (cooling/heating).

CHANGE OF SEASON FROM UNIT CIRCUIT BOARD

CHANGE OF SEASON FROM PR3 REMOTE PANEL (ACCESSORY)

REMOTE PANEL ENABLING

OPERATING CHARACTERISTICS

ANTI-FREEZE ALARM

Details on the anti-freeze protection mechanism and alarm.

WATER FLOW ALARM

Information about the water flow rate alarm and its operation.

ROUTINE MAINTENANCE

HYDRAULIC CIRCUIT

ELECTRIC CIRCUIT

REFRIGERANT CIRCUIT

PROCEDURE FOR SELECTION OF SYSTEM TYPE

HOW TO MODIFY A USER MENU PARAMETER

Instructions for changing user-level parameters on the control board.

HOW TO MODIFY AN INSTALLER MENU PARAMETER

Instructions for changing installer-level parameters on the control board.