AERMEC ANL102A User Manual

18.01. 6755441_03
INSTALLATION MANUAL
CHILLERS
REVERSIBLE HEAT PUMPS
CONDENSING UNITS
• EXTERNAL UNITS
• HIGH EFFICIENCY
• HOT WATER PRODUCTION UP TO 50 °C
Aermec
participates in the EUROVENT Programme: LCP.
The products of interest can be found on:
www.eurovent-certification.com
EN
ANL
ANL-H
020-202

AERMEC ANL102A Specifications

General

Brand	AERMEC
Model	ANL102A
Category	Heat Pump
Language	English

Summary

1. GENERAL INSTRUCTIONS FOR THE INSTALLER

1.2. SAFETY INSTRUCTIONS AND INSTALLATION STANDARDS

Guidance on safety precautions, installation standards, and technician qualifications.

2. SELECTION AND POSITION OF INSTALLATION

4. TYPICAL HYDRAULIC CIRCUITS

4.1. INTERNAL AND EXTERNAL HYDRAULIC CIRCUIT ANL "°" | "H" (standard)

Diagram and components for standard internal and external hydraulic circuits.

4.2. INTERNAL AND EXTERNAL HYDRAULIC CIRCUIT ANL "°P|°N" / "HP|HN"

Diagrams and components for ANL °P/°N and HP/HN hydraulic circuits.

4.3. INTERNAL AND EXTERNAL HYDRAULIC CIRCUIT ANL "A|°Q" / "HA|HQ"

Diagrams and components for ANL A/°Q and HA/HQ hydraulic circuits.

4.5. SYSTEM CHARGING

4.6. SYSTEM DRAINING

5. ELECTRICAL CONNECTIONS

MANDATORY REQUIREMENTS

Essential requirements for electrical connections and installation.

7. ELECTRICAL POWER SUPPLY CONNECTIONS

8. CHECKS AND FIRST START-UP

8.1. PREPARING FOR FIRST START-UP

8.2. START-UP

Procedures for powering up the unit and performing preliminary checks.

8.3. FIRST START-UP

Detailed checks during unit operation, including refrigerant and control systems.

8.5. CHANGE OF SEASON FROM UNIT CIRCUIT BOARD

8.6. CHANGE OF SEASON FROM PR3 REMOTE PANEL (ACCESSORY)

9. OPERATING CHARACTERISTICS

9.5. ANTI-FREEZE ALARM

9.6. WATER FLOW ALARM

10. ROUTINE MAINTENANCE

10.1. HYDRAULIC CIRCUIT

10.2. ELECTRIC CIRCUIT

10.3. REFRIGERANT CIRCUIT

13. PROCEDURE FOR SELECTION OF SYSTEM TYPE

13.1. HOW TO MODIFY A USER MENU PARAMETER

Step-by-step guide to modifying user menu parameters on the control board.

13.2. HOW TO MODIFY AN INSTALLER MENU PARAMETER

Procedure for accessing and modifying installer menu parameters.