AERMEC ANL152HQ - User Manual

18.01. 6755441_03
INSTALLATION MANUAL
CHILLERS
REVERSIBLE HEAT PUMPS
CONDENSING UNITS
• EXTERNAL UNITS
• HIGH EFFICIENCY
• HOT WATER PRODUCTION UP TO 50 °C
Aermec
participates in the EUROVENT Programme: LCP.
The products of interest can be found on:
www.eurovent-certification.com
EN
ANL
ANL-H
020-202

AERMEC ANL152HQ Specifications

General

Brand	AERMEC
Model	ANL152HQ
Category	Heat Pump
Language	English

Summary

1. GENERAL INSTRUCTIONS FOR THE INSTALLER

1.2. SAFETY INSTRUCTIONS AND INSTALLATION STANDARDS

Guidelines for safe installation and adherence to applicable standards.

2. SELECTION AND POSITION OF INSTALLATION

2.2.1. POSITIONING

Guidance on selecting the right location and physically positioning the unit.

4. TYPICAL HYDRAULIC CIRCUITS

4.1. INTERNAL AND EXTERNAL HYDRAULIC CIRCUIT ANL 027 027|H (standard)

4.2. INTERNAL AND EXTERNAL HYDRAULIC CIRCUIT ANL 027 027|N; HP|HN

4.3. INTERNAL AND EXTERNAL HYDRAULIC CIRCUIT ANL 027 027|Q; HA|HQ

5. ELECTRICAL CONNECTIONS

MANDATORY REQUIREMENTS

Essential requirements for electrical connections and safety.

7. ELECTRICAL POWER SUPPLY CONNECTIONS

WARNINGS AND FIRST START-UP

Important warnings and procedures before initial power up.

8. CHECKS AND FIRST START-UP

8.1. PREPARING FOR FIRST START-UP

8.2. START-UP

9. OPERATING CHARACTERISTICS

9.5. ANTI-FREEZE ALARM

Description and checking procedure for the anti-freeze alarm.

10. ROUTINE MAINTENANCE

10.1. HYDRAULIC CIRCUIT

10.2. ELECTRIC CIRCUIT

13. PROCEDURE FOR SELECTION OF SYSTEM TYPE

13.1. HOW TO MODIFY A USER MENU PARAMETER

13.2. HOW TO MODIFY AN INSTALLER MENU PARAMETER