AERMEC ANL080HP - User Manual

18.01. 6755441_03
INSTALLATION MANUAL
CHILLERS
REVERSIBLE HEAT PUMPS
CONDENSING UNITS
• EXTERNAL UNITS
• HIGH EFFICIENCY
• HOT WATER PRODUCTION UP TO 50 °C
Aermec
participates in the EUROVENT Programme: LCP.
The products of interest can be found on:
www.eurovent-certification.com
EN
ANL
ANL-H
020-202

AERMEC ANL080HP Specifications

General

Cooling Capacity	8.0 kW
Refrigerant	R410A
Weight	62 kg
Cooling output	8.0 kW
Power Supply	230V/1Ph/50Hz

Summary

General Instructions for the Installer

Safety Instructions and Installation Standards

Adhere to safety guidelines and national standards during installation.

Selection and Position of Installation

Positioning Guidelines

Typical Hydraulic Circuits

Standard Hydraulic Circuit (ANL °;H)

Hydraulic System Operations

System Charging Procedure

Steps for correctly charging the hydraulic system with water.

System Draining Procedure

Steps for correctly draining the hydraulic system of water.

Electrical Connections

Mandatory Electrical Requirements

Essential requirements for safe and compliant electrical connections.

Electrical Power Supply Connections

Checks and First Start-up Procedure

Pre-connection checks, power hookup, and initial unit start-up.

Checks and First Start-up

Preliminary Checks Before Powering Up

Essential checks before applying power to the unit.

Checks During Unit Operation

Routine and Special Maintenance

Routine Maintenance Checks

System Type Selection and Configuration

Modifying User Menu Parameters

Modifying Installer Menu Parameters