AERMEC ANL080Q - User Manual

18.01. 6755441_03
INSTALLATION MANUAL
CHILLERS
REVERSIBLE HEAT PUMPS
CONDENSING UNITS
• EXTERNAL UNITS
• HIGH EFFICIENCY
• HOT WATER PRODUCTION UP TO 50 °C
Aermec
participates in the EUROVENT Programme: LCP.
The products of interest can be found on:
www.eurovent-certification.com
EN
ANL
ANL-H
020-202

AERMEC ANL080Q Specifications

General

Cooling Capacity	8.0 kW
Refrigerant	R410A
Power Supply	230V/1Ph/50Hz
Sound Pressure Level	52 dB(A)
Weight	85 kg
EER	3.2
COP	3.6

Summary

General Instructions for Installer

Safety and Installation Standards

Critical safety guidelines and compliance with installation standards for correct unit setup.

Unit Selection and Positioning

Positioning Guidelines

Hydraulic Circuit Configurations

Standard Hydraulic Circuit (ANL °|°H)

Hydraulic Circuit (ANL °P|°N; HP|HN)

Hydraulic Circuit (ANL °A|°Q; HA|HQ)

System Charging Procedure

Step-by-step guide for charging the hydraulic system of the unit.

System Draining Procedure

Instructions for safely draining the hydraulic system of the unit.

Electrical Connection Guide

Power Supply Connection Procedure

Pre-Operation Checks and Start-Up

Preparation and Start-Up Procedures

Includes preparation, preliminary checks, and execution of first start-up.

Unit Operating Characteristics

Setpoint Adjustments and Timers

Details on cooling/heating setpoints and compressor delay timers.

Pump Operation and Safety Alarms

Information on circulating pumps, anti-freeze, and water flow alarms.

Routine Maintenance Procedures

Hydraulic, Electric, and Refrigerant Circuit Checks

System Type Configuration

Modifying User Menu Parameters

Modifying Installer Menu Parameters