AERMEC ANL080A - User Manual

18.01. 6755441_03
INSTALLATION MANUAL
CHILLERS
REVERSIBLE HEAT PUMPS
CONDENSING UNITS
• EXTERNAL UNITS
• HIGH EFFICIENCY
• HOT WATER PRODUCTION UP TO 50 °C
Aermec
participates in the EUROVENT Programme: LCP.
The products of interest can be found on:
www.eurovent-certification.com
EN
ANL
ANL-H
020-202

AERMEC ANL080A Specifications

General

Brand	AERMEC
Model	ANL080A
Category	Heat Pump
Language	English

Summary

General Instructions for the Installer

Safety Instructions and Installation Standards

Essential safety rules and installation standards for qualified technicians.

Selection and Position of Installation

Positioning

Guidelines for selecting and correctly positioning the unit on-site.

Typical Hydraulic Circuits

Internal and External Hydraulic Circuit ANL ° | H (standard)

Standard hydraulic circuit diagrams for ANL units with ° or H variants.

Internal and External Hydraulic Circuit ANL °P|°N; HP|HN

Hydraulic circuit diagrams for ANL units with °P/°N and HP/HN variants.

Internal and External Hydraulic Circuit ANL A|°Q; HA|HQ

System Charging

System Draining

Electrical Connections

Mandatory Requirements

Essential requirements for safe and compliant electrical connections.

Electrical Power Supply Connections

Checks and First Start-Up

Preparing for First Start-Up

Steps to take before initiating the first start-up procedure.

Start-Up Procedures

Detailed steps for powering up and initial checks of the unit.

Unit Operation Checks

Verification of unit performance and parameters during operation.

Change of Season

Procedures for selecting heating or cooling mode based on season.

Operating Characteristics

Anti-Freeze Alarm

Alarm system to prevent freezing damage to the heat exchanger.

Water Flow Alarm

Safety feature to stop operation if water flow is insufficient.

Routine Maintenance

Hydraulic Circuit

Electric Circuit

Refrigerant Circuit

Procedure for Selection of System Type

How to Modify a User Menu Parameter

How to Modify an Installer Menu Parameter