AERMEC ANL030HA User Manual

18.01. 6755441_03
INSTALLATION MANUAL
CHILLERS
REVERSIBLE HEAT PUMPS
CONDENSING UNITS
• EXTERNAL UNITS
• HIGH EFFICIENCY
• HOT WATER PRODUCTION UP TO 50 °C
Aermec
participates in the EUROVENT Programme: LCP.
The products of interest can be found on:
www.eurovent-certification.com
EN
ANL
ANL-H
020-202

AERMEC ANL030HA Specifications

General

Category	Heat Pump
Model	ANL030HA
Refrigerant	R410A
Compressor type	Rotary
Power Supply	230V/1/50Hz

Summary

1. GENERAL INSTRUCTIONS FOR THE INSTALLER

1.2. SAFETY INSTRUCTIONS AND INSTALLATION STANDARDS

Essential safety rules and standards for proper and safe installation of the unit.

2. SELECTION AND POSITION OF INSTALLATION

4. TYPICAL HYDRAULIC CIRCUITS

4.1. INTERNAL AND EXTERNAL HYDRAULIC CIRCUIT ANL °|°H (standard)

Standard hydraulic circuit for ANL units with ° and H versions.

4.5. SYSTEM CHARGING

Step-by-step procedure for filling the system with water.

4.6. SYSTEM DRAINING

Instructions for safely draining the system water.

5. ELECTRICAL CONNECTIONS

8. CHECKS AND FIRST START-UP

8.3. FIRST START-UP

Detailed steps for the initial startup of the unit.

8.3.1. CHECKS WITH THE UNIT RUNNING

Essential checks to perform while the unit is operating.

9. OPERATING CHARACTERISTICS

9.1. COOLING SETPOINT

Default and adjustable cooling temperature setpoints.

9.5. ANTI-FREEZE ALARM

Explanation and handling of the anti-freeze protection alarm.

10. ROUTINE MAINTENANCE

10.1. HYDRAULIC CIRCUIT

Maintenance checks for the unit's water system.

10.3. REFRIGERANT CIRCUIT

Maintenance checks for the unit's refrigerant system.