AERMEC ANL040HP - User Manual

18.01. 6755441_03
INSTALLATION MANUAL
CHILLERS
REVERSIBLE HEAT PUMPS
CONDENSING UNITS
• EXTERNAL UNITS
• HIGH EFFICIENCY
• HOT WATER PRODUCTION UP TO 50 °C
Aermec
participates in the EUROVENT Programme: LCP.
The products of interest can be found on:
www.eurovent-certification.com
EN
ANL
ANL-H
020-202

AERMEC ANL040HP Specifications

General

Brand	AERMEC
Model	ANL040HP
Category	Heat Pump
Language	English

Summary

General Installation Instructions

Safety and Installation Standards

Installation by qualified technicians following national standards is mandatory.

Hydraulic Circuits and System Operations

Typical Hydraulic Circuit Diagrams

System Charging and Draining Procedures

Step-by-step guide for system charging and draining, including safety precautions.

Electrical Data and Connections

Electrical Connection Requirements

Instructions and mandatory requirements for unit power supply connection.

Electrical Data Tables

Details on input power, current, and recommended cable cross-sections.

Checks and Start-Up Procedures

Preparation for First Start-Up

Start-Up Procedures

Preliminary checks before powering up and during unit operation.

First Start-Up Procedures

Steps for initial unit start-up and refrigerant circuit checks.

System Type Selection

Modifying User Menu Parameters

Modifying Installer Menu Parameters

Instructions for changing installer-specific settings on the control board.