AERMEC ANL080H - User Manual

18.01. 6755441_03
INSTALLATION MANUAL
CHILLERS
REVERSIBLE HEAT PUMPS
CONDENSING UNITS
• EXTERNAL UNITS
• HIGH EFFICIENCY
• HOT WATER PRODUCTION UP TO 50 °C
Aermec
participates in the EUROVENT Programme: LCP.
The products of interest can be found on:
www.eurovent-certification.com
EN
ANL
ANL-H
020-202

AERMEC ANL080H Specifications

General

Brand	AERMEC
Model	ANL080H
Category	Heat Pump
Language	English

Summary

General Instructions for the Installer

Safety Instructions and Installation Standards

Guidelines for safe installation and adherence to standards.

Typical Hydraulic Circuits

Standard ANL °; H Hydraulic Circuit

Standard hydraulic circuit for ANL units.

ANL °P|°N; HP|HN Hydraulic Circuit

ANL A|°Q; HA|HQ Hydraulic Circuit

DHW Production System Example with VMF-ACS

System Charging Procedure

Procedure for charging the system with water.

System Draining Procedure

Procedure for draining the system.

Electrical Connections and Requirements

Mandatory Electrical Connection Requirements

Essential requirements for electrical connections.

Checks and First Start-Up Procedures

Pre-Startup and Power-On Checks

Procedures for preparing and performing initial unit startup checks.

Operational Checks and Safety Verification

Checks during unit operation and verification of safety/control features.

Seasonal Operation Adjustments

Operating Characteristics

Cooling Setpoint Adjustment

Heating Setpoint Adjustment

Compressor Delay Timers Settings

Circulating Pumps Operation

Anti-Freeze Alarm Functionality

How the anti-freeze protection system works.

Water Flow Alarm Functionality

How the water flow alarm system operates.

Routine Maintenance Procedures

Hydraulic Circuit Maintenance Checks

Checks for the unit's hydraulic system.

Electric Circuit Maintenance Checks

Checks for the unit's electrical system.

Refrigerant Circuit Maintenance Checks

Checks for the unit's refrigerant circuit.

Mechanical Maintenance Checks

Special Maintenance Procedures