AERMEC ANL070A - User Manual

18.01. 6755441_03
INSTALLATION MANUAL
CHILLERS
REVERSIBLE HEAT PUMPS
CONDENSING UNITS
• EXTERNAL UNITS
• HIGH EFFICIENCY
• HOT WATER PRODUCTION UP TO 50 °C
Aermec
participates in the EUROVENT Programme: LCP.
The products of interest can be found on:
www.eurovent-certification.com
EN
ANL
ANL-H
020-202

AERMEC ANL070A Specifications

General

Category	Heat Pump
Heating Capacity	7.5 kW
Power Supply	230V/1Ph/50Hz
Energy Efficiency Ratio (Cooling)	3.21
Coefficient of Performance (Heating)	3.61
Refrigerant	R410A
Cooling Capacity	7.0 kW

Summary

INSTALLATION MANUAL

GENERAL INSTRUCTIONS FOR THE INSTALLER

SAFETY INSTRUCTIONS AND INSTALLATION STANDARDS

Essential safety guidelines and installation standards for proper and safe unit operation.

SELECTION AND POSITION OF INSTALLATION

POSITIONING GUIDELINES

TYPICAL HYDRAULIC CIRCUITS

Hydraulic Circuit Configurations

System Charging and Draining Procedures

Steps for correctly charging and draining the hydraulic system.

ELECTRICAL CONNECTIONS

MANDATORY ELECTRICAL REQUIREMENTS

Essential requirements and precautions for electrical connections and installations.

ELECTRICAL DATA

ELECTRICAL POWER SUPPLY CONNECTIONS

Guidelines and data for connecting the unit to the power supply.

CHECKS AND FIRST START-UP

Preparing for First Start-Up

Start-Up Procedures

Steps for starting the unit, including preliminary and operational checks.

OPERATING CHARACTERISTICS

Setpoint Management

Safety Alarms

Description of anti-freeze and water flow alarms and their behavior.

ROUTINE MAINTENANCE

Hydraulic Circuit Checks

Electric Circuit Checks

Refrigerant Circuit Checks

PROCEDURE FOR SELECTION OF SYSTEM TYPE

Modifying User Menu Parameters

Modifying Installer Menu Parameters