AERMEC ANL040HA User Manual

18.01. 6755441_03
INSTALLATION MANUAL
CHILLERS
REVERSIBLE HEAT PUMPS
CONDENSING UNITS
• EXTERNAL UNITS
• HIGH EFFICIENCY
• HOT WATER PRODUCTION UP TO 50 °C
Aermec
participates in the EUROVENT Programme: LCP.
The products of interest can be found on:
www.eurovent-certification.com
EN
ANL
ANL-H
020-202

AERMEC ANL040HA Specifications

General

Brand	AERMEC
Model	ANL040HA
Category	Heat Pump
Language	English

Summary

General Installation Instructions

Safety Instructions and Installation Standards

Essential safety guidelines and compliance with installation standards.

Unit Selection and Installation Position

Positioning Guidelines

Detailed instructions on how to correctly position the unit for installation.

Typical Hydraulic Circuits

Standard ANL Hydraulic Circuit

ANL °P|°N / HP|HN Hydraulic Circuit

ANL A|°Q / HA|HQ Hydraulic Circuit

System Charging Procedure

Step-by-step guide for charging the hydraulic system.

System Draining Procedure

Step-by-step guide for draining the hydraulic system.

Electrical Connections

Electrical Data

Electrical Power Supply Connections

Checks and First Start-up

Preparing for First Start-up

Pre-operational checks and preparations before initial startup.

Start-up Procedures

Steps for powering up, initial checks, and starting the unit.

Operating Characteristics

Cooling Setpoint

Heating Setpoint

Anti-Freeze Alarm Function

Explanation of the anti-freeze protection system and alarms.

Water Flow Alarm Function

Explanation of the water flow rate monitoring and alarm.

Routine Maintenance

Hydraulic Circuit Maintenance

Checks and maintenance for the hydraulic system.

Electric Circuit Maintenance

Refrigerant Circuit Maintenance

Mechanical Checks

Procedure for System Type Selection

How to Modify a User Menu Parameter

Guide to changing user-configurable parameters.

How to Modify an Installer Menu Parameter

Guide to changing installer-specific parameters.