AERMEC ANL090HA User Manual

18.01. 6755441_03
INSTALLATION MANUAL
CHILLERS
REVERSIBLE HEAT PUMPS
CONDENSING UNITS
• EXTERNAL UNITS
• HIGH EFFICIENCY
• HOT WATER PRODUCTION UP TO 50 °C
Aermec
participates in the EUROVENT Programme: LCP.
The products of interest can be found on:
www.eurovent-certification.com
EN
ANL
ANL-H
020-202

AERMEC ANL090HA Specifications

General

Brand	AERMEC
Model	ANL090HA
Category	Heat Pump
Language	English

Summary

General Installer Instructions

Safety and Installation Standards

Guidelines for safe installation, adherence to national and international standards.

Installation Site Selection and Positioning

Unit Positioning Guidelines

Typical Hydraulic Circuits

Standard Hydraulic Circuit (ANL °/H)

Hydraulic Circuit (ANL °P/°N, HP/HN)

Hydraulic Circuit (ANL A/°Q, HA/HQ)

System Charging Procedure

System Draining Procedure

Electrical Connections

Mandatory Electrical Requirements

Essential requirements for electrical connection, including circuit breakers and earthing.

Electrical Power Supply Connections

Pre-Connection Checks and First Start-up Warnings

Important warnings and checks before powering up and initial start-up.

Checks and First Start-up Procedures

First Start-up Preparation

Information regarding preparation and agreed start-up services.

Unit Start-up Sequence

Step-by-step guide for powering up and initiating unit operation.

Checks During Unit Operation

Checks for refrigerant circuit, safety devices, and control systems.

Operating Characteristics and Alarms

Anti-Freeze Alarm and Protection

Description of the anti-freeze alarm and the unit's protection mechanism.

Water Flow Alarm Function

Explanation of the water flow alarm and its effect on unit operation.

Routine Maintenance Schedule

Hydraulic Circuit Maintenance Checks

Electric Circuit Maintenance Checks

Refrigerant Circuit Maintenance Checks

System Type Configuration

User Menu Parameter Modification

Installer Menu Parameter Modification