AERMEC ANL202Q - User Manual

18.01. 6755441_03
INSTALLATION MANUAL
CHILLERS
REVERSIBLE HEAT PUMPS
CONDENSING UNITS
• EXTERNAL UNITS
• HIGH EFFICIENCY
• HOT WATER PRODUCTION UP TO 50 °C
Aermec
participates in the EUROVENT Programme: LCP.
The products of interest can be found on:
www.eurovent-certification.com
EN
ANL
ANL-H
020-202

AERMEC ANL202Q Specifications

General

Brand	AERMEC
Model	ANL202Q
Category	Heat Pump
Language	English

Summary

General Instructions for the Installer

Safety Instructions and Installation Standards

Guidelines for safe installation by qualified personnel.

Typical Hydraulic Circuits

System Charging

Step-by-step procedure for charging the system with water.

System Draining

Electrical Connections

Mandatory Requirements

Essential requirements for electrical connections and safety.

Electrical Safety Warnings

Prohibits using water pipes for earthing and warns about terminal tightness.

Electrical Power Supply Connections

Checks and First Start-up Warning

Important checks before powering up the unit.

Checks and First Start-up

Preparing for First Start-up

Start-up and Preliminary Checks

Covers preliminary checks and initial power-up procedures.

Unit Operation and Circuit Checks

Checks for refrigerant circuit and safety devices during operation.

Seasonal Operation Management

Procedures for changing the unit's operating season.

Routine Maintenance

Hydraulic Circuit Checks

Annual checks for the hydraulic circuit.

Electric Circuit Checks

Annual checks for the electric circuit.

Refrigerant Circuit Checks

Annual checks for the refrigerant circuit.

Mechanical Checks

Checks for tightness of screws and unit structure.

Special Maintenance