AERMEC ANL102HA User Manual

18.01. 6755441_03
INSTALLATION MANUAL
CHILLERS
REVERSIBLE HEAT PUMPS
CONDENSING UNITS
• EXTERNAL UNITS
• HIGH EFFICIENCY
• HOT WATER PRODUCTION UP TO 50 °C
Aermec
participates in the EUROVENT Programme: LCP.
The products of interest can be found on:
www.eurovent-certification.com
EN
ANL
ANL-H
020-202

AERMEC ANL102HA Specifications

General

Brand	AERMEC
Model	ANL102HA
Category	Heat Pump
Language	English

Summary

General Instructions for the Installer

Safety Instructions and Installation Standards

Emphasizes qualified technicians, reading instructions, and safety precautions.

Selection and Position of Installation

Positioning

Typical Hydraulic Circuits

Internal and External Hydraulic Circuit ANL "°" | "H" (standard)

Explains standard hydraulic circuits for ANL units.

Internal and External Hydraulic Circuit ANL "°P|°N" / "HP|HN"

Internal and External Hydraulic Circuit ANL "A|°Q" / "HA|HQ"

System Charging

Procedure for filling the system with water.

System Draining

Procedure for emptying the system of water.

Electrical Connections

Mandatory Requirements

Key requirements for electrical connections and safety.

Electrical Power Supply Connections

Warnings and First Start-Up

Important warnings and checks before initial power-up.

Checks and First Start-Up

Preparing for First Start-Up

Start-Up

Preliminary Checks Before Powering Up

Checks to be Done When Powered Up

First Start-Up

Detailed procedure for the initial startup of the unit.

Checks With the Unit Running

Checks to perform while the unit is in operation.

Safety and Control Devices

Verification of safety and control system functions.

Routine Maintenance

Hydraulic Circuit

Electric Circuit

Refrigerant Circuit