AERMEC ANL152A - User Manual

18.01. 6755441_03
INSTALLATION MANUAL
CHILLERS
REVERSIBLE HEAT PUMPS
CONDENSING UNITS
• EXTERNAL UNITS
• HIGH EFFICIENCY
• HOT WATER PRODUCTION UP TO 50 °C
Aermec
participates in the EUROVENT Programme: LCP.
The products of interest can be found on:
www.eurovent-certification.com
EN
ANL
ANL-H
020-202

Summary

EU Declaration of Conformity

EC Declaration of Conformity

1. General Instructions for the Installer

1.2. Safety Instructions and Installation Standards

Install by qualified technician, follow national legislation and safety precautions.

2. Selection and Position of Installation

2.2.1. Positioning

Verify lifting capability, move units appropriately, secure level base, ensure access.

4. Typical Hydraulic Circuits

4.5. System Charging

Step-by-step guide for system charging procedure, including warnings.

4.6. System Draining

Step-by-step guide for system draining procedure, including warnings.

5. Electrical Connections

7. Electrical Power Supply Connections

8. Checks and First Start-up

8.1. Preparing for First Start-up

Details preparation steps for initial unit start-up, including service agreements.

8.2. Start-up Procedures

Covers preliminary checks, powered-up checks, and initial unit start-up sequence.

9. Operating Characteristics

9.5. Anti-Freeze Alarm

Details the anti-freeze protection mechanism and alarm conditions.

9.6. Water Flow Alarm

Explains the water flow alarm function using a differential pressure or flow switch.

10. Routine Maintenance

10.1. Hydraulic Circuit

Checks for routine maintenance of the hydraulic circuit.

10.2. Electric Circuit

Checks for routine maintenance of the electric circuit.

10.3. Refrigerant Circuit

Checks for routine maintenance of the refrigerant circuit.

10.4. Mechanical Checks

13. Procedure for Selection of System Type

13.1. How to Modify a User Menu Parameter

13.2. How to Modify an Installer Menu Parameter

AERMEC ANL152A Specifications