Need help?Do you have a question about the AERMEC ANK030 H and is the answer not in the manual?
Describes the different versions of the ANK unit available.
Details the components and function of the cooling circuit.
Explains the standard hydraulic circuit components and their function.
Explains the safety and control components used in the unit.
Details the operational limits for cooling.
Details operational limits for heating (ANK 030-045).
Details operational limits for heating (ANK 050).
Heating capacity and input power data for ANK 030 H.
Pressure drop for system exchanger and piping.
Pressure drop across the water filter.
Guide to using curves for glycol correction factors.
Procedure for calibrating the expansion vessel.
Details sound power and pressure levels.
Parameters for setting temperature and thermostat functions.
Calibration details for protection devices.
Instructions on handling and passing on documentation.
Crucial warnings for installation safety and standards.
Specifies required clearance for installation and maintenance.
Illustrates safe handling procedures for the unit.
Principle diagram and components for standard ANK H.
Specifies positioning for antivibration elements.
Details hydraulic connection points for HA version.
Details hydraulic connection points for H version.
Guidance on selecting appropriate electric cable sizes.
Steps for connecting the unit to the main power supply.
Details for connecting external devices and accessories.
Wiring for remote controls like season changeover and ON/OFF.
Wiring for remote alarms, DHW thermostats, and boiler control.
Steps for preparing and commissioning the unit.
Methods for changing the unit's operating season.
Setting desired temperatures for cooling and heating modes.
Details compressor delay, anti-freeze, and water flow alarms.
Routine checks for hydraulic, electric, and cooling circuits.
To Next Page
General
