Need help?Do you have a question about the AERMEC ANZ 020 and is the answer not in the manual?
Details the compliance with European directives and harmonized standards for refrigerating systems and materials.
Instructions for manual upkeep, careful installation, and adherence to safety and local regulations.
Covers warranty voiding due to tampering, improper use, non-authorised repairs, and other exclusions.
Air-cooled heat pumps for medium/small users, featuring high-efficiency scroll compressors and quiet operation.
Explains model sizing and configuration options to meet specific plant requirements.
Details the model naming convention and configuration choices for power supply, materials, and specific features like heat pumps.
Describes compressors, heat exchangers, filters, expansion tanks, and accumulation tanks.
Explains electrical panel, electronic card, electronic regulation, and control unit functions.
Describes the unit's covering furniture and the balanced fan unit with safety protections.
Details high/low pressure switches, high-temperature thermostat, and differential pressure/flow switches for safety.
Lists microprocessor functions like temperature adjustment, compressor control, alarm management, and parameter display.
Covers PRD/PR1 remote panels, DCPX low-temperature device, and SDP distance adaptation card.
Details KR/RA heating elements, VT shock absorbers, DRE current reduction, and BDX condensate basin.
A table summarizing accessory compatibility across different ANZ models.
Tables for cooling capacity, input power, water flow, and EER across various models.
Data on power supply, FLA, LRA, compressor/fan types, and evaporator details.
Tables detailing physical dimensions, weight, and sound pressure levels for the units.
Tables for heating capacity, input power, water flow, and COP across various models.
Data on power supply, FLA, LRA, compressor/fan types, and evaporator details.
Tables detailing physical dimensions, weight, and sound pressure levels for the units.
Tables for cooling capacity, input power, water flow, expansion tank, and accumulation tank capacities.
Data on power supply, FLA, LRA, compressor/fan types, and evaporator details for units with accumulation.
Tables detailing physical dimensions, weight, and sound pressure levels for units with accumulation.
Tables for heating capacity, input power, water flow, expansion tank, and accumulation tank capacities.
Data on power supply, FLA, LRA, compressor/fan types, and evaporator details for units with accumulation.
Tables detailing physical dimensions, weight, and sound pressure levels for units with accumulation.
Diagrams illustrating operational limits based on air and water temperatures for cooling and heating.
Explains diagrams for correction coefficients related to glycol water usage and exchanger dirtying.
Advises on installation in non-salty environments and the need for wind breaks in windy positions.
Diagram for obtaining cooling capacity and input power correction coefficients based on water and external air temperatures.
Guidance on using the diagram to adjust cooling capacity and input power for H versions.
Diagram for obtaining heating capacity and input power correction coefficients based on outside air temperature.
Guidance on using the diagram to adjust heating capacity and input power for H versions.
Charts showing pressure drops for evaporators and water filters based on water flow rate.
Table providing correction factors for evaporator pressure drops based on average water temperature.
Notes on storage tank installation, plug replacement, and maximum water content for plant compatibility.
Table of correction factors for glycol solutions at various concentrations and operating temperatures.
Details expansion tank pressure charge, maximum value, and calibration formula based on height difference.
Graph showing available static pressure for the plant in relation to water flow rate for different ANZ models.
Diagram and key explaining correction factors for cooling capacity, input power, and pressure drops based on glycol percentage.
Guidance on applying correction factors for water flow rate and pressure drops when using glycol.
Instructions on using diagrams to find glycol percentage and correction coefficients based on air or water temperatures.
Clarification that outside air and processed water temperatures are not directly linked on the graph.
Tables for correction factors based on temperature differences (Δt) and fouling factors for performance adjustments.
Details acoustic power, sound pressure, and calibration settings for control parameters and protection devices.
Information on supplementary heater power, K/J versions, and installation locations.
Table detailing compatibility of various boiler kits (BW4KW, BW5KW) for ANZ K/J models.
Illustrates system configurations for AK/AJ versions, showing key components and connections.
Manages three-way valve for radiant panels, with temperature calculation formula and probe usage.
Details unit components, indicators, factory settings, and adjustment trimmers for optimal operation.
Explains self-compensation of water set based on outside temp and defines key parameters (rL, r3, rF, rE).
Diagrams illustrating heat compensation logic for radiating panels and fan coils based on temperatures.
Technical drawings showing dimensions and connections for ANZ 0207/0257H and HA/HK/HJ models.
Technical drawings showing dimensions and connections for ANZ 0307H and HA/HK/HJ models.
Technical drawings showing dimensions and connections for ANZ 0417H and HA/HK/HJ models.
Technical drawings showing dimensions and connections for ANZ 0507H/080H and 050HA/080HA models.
Technical drawings showing dimensions and connections for ANZ 0907H and HA models.
Technical drawings showing dimensions and connections for ANZ 1007/1507/2007H and HA models.
Technical drawings for ANZ 050HAK/050HAJ models with accumulation and electric heater.
Technical drawings for ANZ 080HAK/080HAJ models with accumulation and electric heater.
Technical drawings for ANZ 0907HAK/0907HAJ models with accumulation and electric heater.
Technical drawings for ANZ 1007HAK/1007HAJ models with accumulation and electric heater.
Technical drawings for ANZ 150HAK/150HAJ models with accumulation and electric heater.
Technical drawings for ANZ 200HAK/200HAJ models with accumulation and electric heater.
Details the compliance with European directives and harmonized standards for refrigerating systems and materials.
Instructions for manual upkeep, careful installation, and adherence to safety and local regulations.
Covers warranty voiding due to tampering, improper use, non-authorised repairs, and other exclusions.
Air-cooled heat pumps for medium/small users, featuring high-efficiency scroll compressors and quiet operation.
Explains model sizing and configuration options to meet specific plant requirements.
Details the model naming convention and configuration choices for power supply, materials, and specific features like heat pumps.
Describes compressors, heat exchangers, filters, expansion tanks, and accumulation tanks.
Explains electrical panel, electronic card, electronic regulation, and control unit functions.
Describes the unit's covering furniture and the balanced fan unit with safety protections.
Details high/low pressure switches, high-temperature thermostat, and differential pressure/flow switches for safety.
Lists microprocessor functions like temperature adjustment, compressor control, alarm management, and parameter display.
Covers PRD/PR1 remote panels, DCPX low-temperature device, and SDP distance adaptation card.
Details KR/RA heating elements, VT shock absorbers, DRE current reduction, and BDX condensate basin.
A table summarizing accessory compatibility across different ANZ models.
Tables for cooling capacity, input power, water flow, and EER across various models.
Data on power supply, FLA, LRA, compressor/fan types, and evaporator details.
Tables detailing physical dimensions, weight, and sound pressure levels for the units.
Tables for heating capacity, input power, water flow, and COP across various models.
Data on power supply, FLA, LRA, compressor/fan types, and evaporator details.
Tables detailing physical dimensions, weight, and sound pressure levels for the units.
Tables for cooling capacity, input power, water flow, expansion tank, and accumulation tank capacities.
Data on power supply, FLA, LRA, compressor/fan types, and evaporator details for units with accumulation.
Tables detailing physical dimensions, weight, and sound pressure levels for units with accumulation.
Tables for heating capacity, input power, water flow, expansion tank, and accumulation tank capacities.
Data on power supply, FLA, LRA, compressor/fan types, and evaporator details for units with accumulation.
Tables detailing physical dimensions, weight, and sound pressure levels for units with accumulation.
Diagrams illustrating operational limits based on air and water temperatures for cooling and heating.
Explains diagrams for correction coefficients related to glycol water usage and exchanger dirtying.
Advises on installation in non-salty environments and the need for wind breaks in windy positions.
Diagram for obtaining cooling capacity and input power correction coefficients based on water and external air temperatures.
Guidance on using the diagram to adjust cooling capacity and input power for H versions.
Diagram for obtaining heating capacity and input power correction coefficients based on outside air temperature.
Guidance on using the diagram to adjust heating capacity and input power for H versions.
Charts showing pressure drops for evaporators and water filters based on water flow rate.
Table providing correction factors for evaporator pressure drops based on average water temperature.
Notes on storage tank installation, plug replacement, and maximum water content for plant compatibility.
Table of correction factors for glycol solutions at various concentrations and operating temperatures.
Details expansion tank pressure charge, maximum value, and calibration formula based on height difference.
Graph showing available static pressure for the plant in relation to water flow rate for different ANZ models.
Diagram and key explaining correction factors for cooling capacity, input power, and pressure drops based on glycol percentage.
Guidance on applying correction factors for water flow rate and pressure drops when using glycol.
Instructions on using diagrams to find glycol percentage and correction coefficients based on air or water temperatures.
Clarification that outside air and processed water temperatures are not directly linked on the graph.
Tables for correction factors based on temperature differences (Δt) and fouling factors for performance adjustments.
Details acoustic power, sound pressure, and calibration settings for control parameters and protection devices.
Information on supplementary heater power, K/J versions, and installation locations.
Table detailing compatibility of various boiler kits (BW4KW, BW5KW) for ANZ K/J models.
Illustrates system configurations for AK/AJ versions, showing key components and connections.
Manages three-way valve for radiant panels, with temperature calculation formula and probe usage.
Details unit components, indicators, factory settings, and adjustment trimmers for optimal operation.
Explains self-compensation of water set based on outside temp and defines key parameters (rL, r3, rF, rE).
Diagrams illustrating heat compensation logic for radiating panels and fan coils based on temperatures.
Technical drawings showing dimensions and connections for ANZ 0207/0257H and HA/HK/HJ models.
Technical drawings showing dimensions and connections for ANZ 0307H and HA/HK/HJ models.
Technical drawings showing dimensions and connections for ANZ 0417H and HA/HK/HJ models.
Technical drawings showing dimensions and connections for ANZ 0507H/080H and 050HA/080HA models.
Technical drawings showing dimensions and connections for ANZ 0907H and HA models.
Technical drawings showing dimensions and connections for ANZ 1007/1507/2007H and HA models.
Technical drawings for ANZ 050HAK/050HAJ models with accumulation and electric heater.
Technical drawings for ANZ 080HAK/080HAJ models with accumulation and electric heater.
Technical drawings for ANZ 0907HAK/0907HAJ models with accumulation and electric heater.
Technical drawings for ANZ 1007HAK/1007HAJ models with accumulation and electric heater.
Technical drawings for ANZ 150HAK/150HAJ models with accumulation and electric heater.
Technical drawings for ANZ 200HAK/200HAJ models with accumulation and electric heater.
To Next Page
General
