7
Configurator
ANZ 041 7 H ° ° ° °
1, 2, 3 4, 5, 6 7 8 9 10 11 12
Sizes
020 - 025 - 030 - 041 - 050 - 080 - 090 - 100 - 150 - 200
Refrigerant :
7 R407C minimum water temperature produced at +4 °C
Model
H
Heat pump
Version
° Standard
A With accumulation and pump
K With accumulation, p u m p a n d e l e c t r i c h e a t e r
(incorporated for the sizes from the 050 to the 200 and
available as accessory, to be fitted externally, for the sizes
from 020 to 041) and basic control.
J With accumulation, pump, electric heater element
(incorporated for sizes from the 050 to the 200 and
available as an accessory to be fitted externally for the 020
to the 041) and advanced control by which a three-way
valve (not supplied) can be managed.
Coil
° - aluminium
R - copper
S - tinned copper
V Made of aluminium with epoxy paint
Evaporator
° - According to PED standards
Power supply
° 3~400V-50Hz
M 1- 230V-50Hz (only for
sizes from the 020 to the 041)
ATTENZION: K and J versions are prearranged for an additional heater, that does not replace the anti freege heater
(supplied as RA, KR accessory).
To Next Page
Loading...
