TABLE OF CONTENTS
Dear Customer,
Thank you for choosing AERMEC. It is the fruit of many years of experience and special design studies and it has been made
of the highest grade materials and with cutting edge technology.
In addition, all our products bear the CE mark indicating that they meet the requirements of the European Machine
Directive regarding safety. The standard of quality is permanently being monitored and AERMEC products are therefore a
synonym for Safety, Quality and Reliability.
If you do not know where our nearest After-Sales Service Centre is, you can get this from the dealership where the device
was purchased.
The data might undergo modifications considered necessary for the improvement of the product.
Thank you again.
AERMEC S.p.A
ENGLISH
General standards 5
Description and choice of unit 6
Configurator 7
Component description 8
ELECTRONIC REGULATION 9
Accessories 10
Technical data 11
Selection criteria 15
Cooling capacity and input power 16
Heating capacity and Input power 17
Ethylene glycol solution 18
Correction factors for ∆t different from the rated value 20
Sound data 20
Check parameter calibrations 20
Size data 21
To Next Page
Loading...
