9
IHBI. 1011. 4138500_00
Outdoor unit
Indoor unit
the image is purely indicative
refer to the user manual for further information
Function
HEATING
Mode
COOLING
Mode
DHW
Mode
HEAT.
+DHW Mode
COOL.
+DHW Mode
A
B
C
D
E
F
G
H
ATTENTION: The HBI unit is set by default on cooling or heating priority
WARNING:
To set the priority on production of DHW, refer to the user manual (Setting LEVEL 1
OPERATIONAL PARAMETERS CHAPTER).
Domestic hot water priority: set the parameters with index 08 - 09 on value 1(as indicated in
the table below).
Anti-legionella Cycle: function can be set via Control Panel on the HBI_E indoor unit
INDEX MODE: VALUE PRIORITY
08 cold
0 cooling request
1 domestic hot water production mode
09 hot
0 heating request
1 domestic hot water production mode
4. DEFAULT SETTINGS
To Next Page
Loading...
Need help?
General
