Aeroflex 3500A - Page 153

CHAPTER 3 - OPERATOR MAINTENANCE
Subject to Export Control, see Cover Page for details. 3-1
3-1. SERVICE UPON RECEIPT
3-1-1. SERVICE UPON RECEIPT OF MATERIAL
A. Unpacking
Special-design packing material inside this shipping carton provides maximum protection for the
3500 / 3500A. Avoid damaging the carton and packing material during equipment unpacking. Use
the following steps for unpacking the 3500 / 3500A.
 Cut and remove the sealing tape on the carton top and open the carton.
 Grasp the 3500 / 3500A transit case firmly, while restraining the shipping carton, and lift the
3500 / 3500A transit case and packing material vertically.
 Place the 3500 / 3500A transit case and end cap packing on a suitable flat, clean and dry
surface.
 Remove the 3500 / 3500A transit case from the protective plastic bag.
 Place protective plastic bag and end cap packing material inside shipping carton.
 Store the shipping carton for future use should the 3500 / 3500A need to be returned.
B. Checking Unpacked Equipment
Use the following steps for checking the equipment.
 Inspect the equipment for damage incurred during shipment. If the equipment has been
damaged, report the damage.
 Check the equipment against the packing slip to see if the shipment is complete. Report all
discrepancies.