APPENDIX C - REMOTE OPERATION
Subject to Export Control, see Cover Page for details. C-1
C-1. GENERAL
The 3500 / 3500A can be controlled through a serial interface.
All commands and data are printable ASCII characters.
Commands can be entered in lowercase, uppercase or a combination of uppercase and lowercase
letters.
All commands must be terminated in some manner. The commands that are written to the
3500 / 3500A must be terminated with a Carriage Return/Line Feed and EOI asserted on the last
byte.
C-2. REMOTE OPERATION CONNECTION
Connect the Breakout Box (REMOTE Connector) to the 3500 / 3500A REMOTE Connector.
The Breakout Box allows connection to an Ethernet or RS-232 external source.
To Next Page
Loading...
