Aeroflex 3500A - Page 276

C-34 Subject to Export Control, see Cover Page for details.
C-4. REMOTE OPERATION COMMANDS (cont)
Setup
COMMAND RANGE DESCRIPTION
:setup:battery:overload? Returns battery overload condition.
:setup:battery:remaining? 0 to 99 Returns battery remaining charge capacity.
:setup:database:usb:save Archives database and transfer file to
attached USB flash drive.
:setup:database:usb:recall Retrieves archive database from USB and
restores cals.
:setup:date:cal:new Day, Month, Year Writes next Calibration Date into RTC
:setup:date:cal_due? Returns next Calibration Date.
:setup:date:current? Returns the current date.
:setup:date:new Day, Month, Year Sets date in RTC.
:setup:ftp:database:recall Retrieves archive database from FTP and
restores cals.
:setup:ftp:database:save Archives database and transfers file to FTP
server.
:setup:ftp:password Sets password for FTP server login.
:setup:ftp:password? Returns password for FTP server login.
:setup:ftp:filepath Sets path to files on FTP server.
:setup:ftp:filepath? Returns path to files on FTP server.
:setup:ftp:server Sets user name for FTP server login.
:setup:ftp:server? Returns user name for FTP server login.
:setup:ftp:user 10, 10, 10, 193 (10.10.10.193) Sets Ethernet address of FTP server.
:setup:ftp:user? Returns Ethernet address of FTP server.
:setup:logkeys:state Sets login key presses status.
:setup:logkeys:state? Returns login key presses status.
:setup:mod_source:more 0 - GEN1 and GEN 2
1 - DCS
2 - DTMF
3 - P25
Sets Modulation Source tile tab to a
specified tab.
:setup:piezo:alarm 1 - <> Hz
2 - <> Hz
3 - <> ms
4 - <> ms
Sets alarm for a specified duration using two
specified frequencies and a rate that the
frequencies oscillate back and forth.
:setup:piezo:alarm:mute Sets alarm mute ON/OFF.
:setup:piezo:alarm:state Sets alarm state ON/OFF.
:setup:piezo:keyclick Enables tone on each keypad key press.
:setup:piezo:keyclick? Returns state of key click.
:setup:piezo:tone Sets tone for a specified duration using a
specified frequency.
:setup:piezo:tone:mute Sets tone mute ON/OFF.
:setup:piezo:tone:state Sets tone state ON/OFF.
:setup:powerdown Enables power down function when timeout
timer expires.
:setup:powerdown? Returns power down function state.
:setup:ppcram:free? Returns PowerPC free RAM value.
:setup:ppcram:total? Returns PowerPC total RAM value.
:setup:ppcflash:free? Returns PowerPC free Flash value.
:setup:ppcflash:total? Returns PowerPC total Flash value.
:setup:ptt:35xx Sets PTT ON/OFF.
:setup:ptt:hw? 0 - Aeroflex Mic
1 - H-250 Mic
2 - Headset Mic
3 - Aeroflex Breakout Box
Returns PTT hardware.