Aeroflex 3500A - Page 277

Subject to Export Control, see Cover Page for details. C-35
C-4. REMOTE OPERATION COMMANDS (cont)
Setup (cont)
COMMAND RANGE DESCRIPTION
:setup:rec:more 0 - Ext Atten dB
1 - Cable Offset Preamp
Sets Receiver tile tab to a specified tab.
:setup:rem:in13? Returns Remote input on Pin 13.
:setup:rem:in14? Returns Remote input on Pin 14.
:setup:rem:in28? Returns Remote input on Pin 28.
:setup:rem:in40? Returns Remote input on Pin 40.
:setup:rem:inall Returns Remote input on all 4 input pins.
:setup:rem:out15 Sets Remote output on Pin 15.
:setup:rem:out29 Sets Remote output on Pin 29.
:setup:rem:out30 Sets Remote output on Pin 30.
:setup:rem:out41 Sets Remote output on Pin 41.
:setup:report:clear Clears report.txt file.
:setup:screen:default Restores current screen settings to default
settings.
:setup:screen:default:all Restores all screens to default settings.
:setup:screen:save Saves current screen settings to Flash
Memory.
:setup:screen:save:status? 1 - Triggered
2 - Started
3 - Completed
Returns save status.
:setup:sleeptime Sets timeout timer time in minutes.
:setup:sleeptime? Returns timeout timer time in minutes.
:setup:temp:battery? Returns battery temperature in degrees.
:setup:temp:internal? Returns FPGA temperature in degrees.
:setup:temp:remote?
Returns I
2
C temperature in degrees.
:setup:time:active? Returns total time unit has been powered on.
:setup:time:current? Returns Time.
:setup:time:new Hours, Minutes, Seconds Writes Time into RTC.
:setup:version:coldfire? Returns ColdFire Application Code version
number.
:setup:version:cfmacaddr? Returns ColdFire MAC address.
:setup:version:cpld:digital? Returns CPLD Digital version number.
:setup:version:cpld:rf? Returns CPLD RF version number.
:setup:version:fpga? Returns FPGA version number.
:setup:version:mf_hdw? Returns Multi-Function PCB Assy version
number.
:setup:version:powerpc? Returns PPC Application Code version
number.
:setup:version:rf_hdw? Returns RF hardware version number
(FPGA).