Subject to Export Control, see Cover Page for details. C-37
C-4. REMOTE OPERATION COMMANDS (cont)
Signal Strength
COMMAND RANGE DESCRIPTION
:sigstr:state? Returns signal strength state.
:sigstr:meas:clearpeak Clears signal strength peak.
:sigstr:meas:newpeak? Returns new signal strength state based on
sample count.
:sigstr:meas:peak? Returns current signal strength peak after
cleared peak.
:sigstr:meas:sample Sets number of samples to check for new
signal strength peak.
:sigstr:meas:sample? Returns number of samples to check for
new signal strength peak.
:sigstr:meas:currsamples? Returns number of samples searched
through for new signal strength peak.
To Next Page
Loading...
