Aeroflex 3500A - Page 280

C-38 Subject to Export Control, see Cover Page for details.
C-4. REMOTE OPERATION COMMANDS (cont)
Sinad Meter
COMMAND RANGE DESCRIPTION
:sinad:demod:alarm:high:limit 0.0 to 60.0 dB Sets Alarm high limit value.
:sinad:demod:alarm:high:limit? Returns Alarm high limit value.
:sinad:demod:alarm:high:state Sets Alarm high limit state.
:sinad:demod:alarm:high:state? Returns Alarm high limit state.
:sinad:demod:alarm:low:limit 0.0 to 60.0 dB Sets Alarm low limit value.
:sinad:demod:alarm:low:limit? Returns Alarm low limit value.
:sinad:demod:alarm:low:state Sets Alarm low limit state.
:sinad:demod:alarm:low:state? Returns Alarm low limit state.
:sinad:demod:average 1 to 99 Sets number of readings to average.
:sinad:demod:average? Returns number of readings to
average.
:sinad:demod:reading:avg? 0.0 to 60.0 dB Returns Sinad Meter reading with
averaged value.
:sinad:demod:reading:clear Clear Sinad Meter reading.
:sinad:demod:reading:max? 0.0 to 60.0 dB Returns Sinad Meter reading maximum
value.
:sinad:demod:reading:min? 0.0 to 60.0 dB Returns Sinad Meter reading minimum
value.
:sinad:demod:reading:val? 0.0 to 60.0 dB Returns Sinad Meter average value.
:sinad:demod:state Activates Sinad Meter on demod input.
:sinad:demod:state? Returns Sinad Meter state on demod
input.
:sinad:ext_aud_in:alarm:high:limit 0.0 to 60.0 dB Sets Alarm high limit value.
:sinad:ext_aud_in:alarm:high:limit? Returns Alarm high limit value.
:sinad:ext_aud_in:alarm:high:state Sets Alarm high limit state.
:sinad:ext_aud_in:alarm:high:state? Returns Alarm high limit state.
:sinad:ext_aud_in:alarm:low:limit 0.0 to 60.0 dB Sets Alarm low limit value.
:sinad:ext_aud_in:alarm:low:limit? Returns Alarm low limit value.
:sinad:ext_aud_in:alarm:low:state Sets Alarm low limit state.
:sinad:ext_aud_in:alarm:low:state? Returns Alarm low limit state.
:sinad:ext_aud_in:average 1 to 99 Sets number of readings to average.
:sinad:ext_aud_in:average? Returns number of readings to
average.
:sinad:ext_aud_in:filter 0 - No Filter
1 - 15 kHz LP
2 - 300 Hz to 3 kHz BP
Sets audio filter status.
:sinad:ext_aud_in:filter? Returns audio filter status.
:sinad:ext_aud_in:reading:avg? 0.0 to 60.0 dB Returns Sinad Meter reading with
averaged value.
:sinad:ext_aud_in:reading:clear Clear Sinad Meter reading.
:sinad:ext_aud_in:reading:max? 0.0 to 60.0 dB Returns Sinad Meter reading maximum
value.
:sinad:ext_aud_in:reading:min? 0.0 to 60.0 dB Returns Sinad Meter reading minimum
value.
:sinad:ext_aud_in:reading:val? 0.0 to 60.0 dB Returns Sinad Meter average value.
:sinad:ext_aud_in:state Activates Sinad Meter on ext audio
input.
:sinad:ext_aud_in:state? Returns Sinad Meter state on ext
audio input.
:sinad:fgen:alarm:high:limit 0.0 to 60.0 dB Sets Alarm high limit value.
:sinad:fgen:alarm:high:limit? Returns Alarm high limit value.