Aeroflex 3500A - Page 281

Subject to Export Control, see Cover Page for details. C-39
C-4. REMOTE OPERATION COMMANDS (cont)
Sinad Meter (cont)
COMMAND RANGE DESCRIPTION
:sinad:fgen:alarm:high:state Sets Alarm high limit state.
:sinad:fgen:alarm:high:state? Returns Alarm high limit state.
:sinad:fgen:alarm:low:limit 0.0 to 60.0 dB Sets Alarm low limit value.
:sinad:fgen:alarm:low:limit? Returns Alarm low limit value.
:sinad:fgen:alarm:low:state Sets Alarm low limit state.
:sinad:fgen:alarm:low:state? Returns Alarm low limit state.
:sinad:fgen:average 1 to 99 Sets number of readings to average.
:sinad:fgen:average? Returns number of readings to
average.
:sinad:fgen:reading:avg? 0.0 to 60.0 dB Returns Sinad Meter reading with
averaged value.
:sinad:fgen:reading:clear Clear Sinad Meter reading.
:sinad:fgen:reading:max? 0.0 to 60.0 dB Returns Sinad Meter reading maximum
value.
:sinad:fgen:reading:min? 0.0 to 60.0 dB Returns Sinad Meter reading minimum
value.
:sinad:fgen:reading:val? 0.0 to 60.0 dB Returns Sinad Meter average value.
:sinad:fgen:state Activates Sinad Meter on function
generator input.
:sinad:fgen:state? Returns Sinad Meter state on function
generator input.
:sinad:range? Returns Sinad Meter range
information.
:sinad:range:auto Sets Sinad Meter autorange state to
Auto.
:sinad:range:manual Sets Sinad Meter autorange state to
Manual.
:sinad:range:state? 0 - Auto
1 - Manual
2 - Manual - Waiting Update
Returns Sinad Meter autorange state.
Speaker
COMMAND RANGE DESCRIPTION
:speaker:level:squelch:level -150 to 50 Sets speaker level squelch level.
:speaker:level:squelch:level? Returns speaker level squelch level.
:speaker:noise:squelch:level 0 to 100 Sets speaker noise squelch level.
:speaker:noise:squelch:level? Returns speaker noise squelch level.
:speaker:source 0 - EXT_AUD_IN_2_SPEAKER
1 - DEMOD_2_SPEAKER
2 - MODULATION_2_SPEAKER
3 - FGEN_2_SPEAKER
Selects signal source.
:speaker:source? Returns speaker input source.
:speaker:state ON or OFF Turns speaker output ON/OFF.
:speaker:state? Returns speaker output state.
:speaker:volume 0 to 100 Sets speaker volume.
:speaker:volume? Returns speaker volume.