2-56 Subject to Export Control, see Cover Page for details.
B. Diagnostic Screen (cont)
SCREEN FEATURE FUNCTION
RF Power Used to test RF Power.
The test status field (right of the test) displays INVALID until the test
is run, then displays RUNNING, STOPPED, PASSED or FAILED.
RF Error Used to test RF Error.
The test status field (right of the test) displays INVALID until the test
is run, then displays RUNNING, STOPPED, PASSED or FAILED.
RSSI Used to test the Received Signal Strength Indication.
The test status field (right of the test) displays INVALID until the test
is run, then displays RUNNING, STOPPED, PASSED or FAILED.
SPI Used to test Serial Peripheral Interface.
The test status field (right of the test) displays INVALID until the test
is run, then displays RUNNING, STOPPED, PASSED or FAILED.
SINAD Used to test the SINAD Meter.
The test status field (right of the test) displays INVALID until the test
is run, then displays RUNNING, STOPPED, PASSED or FAILED.
Distortion Used to test the Distortion Meter.
The test status field (right of the test) displays INVALID until the test
is run, then displays RUNNING, STOPPED, PASSED or FAILED.
Gen Lock Used to test the Generator (1st LO / 2nd LO).
The test status field (right of the test) displays INVALID until the test
is run, then displays RUNNING, STOPPED, PASSED or FAILED.
Rec Lock Used to test the Receiver (1st LO / 2nd LO).
The test status field (right of the test) displays INVALID until the test
is run, then displays RUNNING, STOPPED, PASSED or FAILED.
Button Battery Used to test the battery used to maintain non-volatile memory.
The test status field (right of the test) displays INVALID until the test
is run, then displays RUNNING, STOPPED, PASSED or FAILED.
AF Counter Used to test the AF Counter.
The test status field (right of the test) displays INVALID until the test
is run, then displays RUNNING, STOPPED, PASSED or FAILED.
Time Domain Used to test the Time Domain.
The test status field (right of the test) displays INVALID until the test
is run, then displays RUNNING, STOPPED, PASSED or FAILED.
Freq Domain Used to test the Frequency Domain.
The test status field (right of the test) displays INVALID until the test
is run, then displays RUNNING, STOPPED, PASSED or FAILED.
SWR Used to test the SWR.
The test status field (right of the test) displays INVALID until the test
is run, then displays RUNNING, STOPPED, PASSED or FAILED.
To Next Page
Loading...
