Subject to Export Control, see Cover Page for details. 2-55
B. Diagnostic Screen
When the Self Test Menu is displayed, press the 2 Key to access the Diagnostic Screen:
Edit Return
Sta rt
STAND ALONE TEST
Mode: Normal Ru n
RF CPLD Inva lid Distortion Invalid
TDM Inva lid Gen Lo ck In valid
FP GA Inva lid Re c Lo ck Invalid
Temperat ure Inva lid Butt on Batt ery Invalid
AM Mod Invalid AF Counter Invalid
FM Mod Inva lid Time Do mai n In val id
RF Power Invalid Freq Domain Invalid
RF Error Invalid SWR Invalid
RSSI Invalid DTMF Invalid
SPI Invalid DCS Invalid
SINAD Invalid
RF CPLD P ass: 0 Fail: 0
41 20 29
SCREEN FEATURE FUNCTION
Mode Used to select the run mode of the Diagnostic Tests.
Select: Normal Run, Loop Selected, Run Selected or Loop All
RF CPLD Used to test Complex Programmable Logic Device.
The test status field (right of the test) displays INVALID until the test
is run, then displays RUNNING, STOPPED, PASSED or FAILED.
TDM Used to test the Time-Division Multiplexing.
The test status field (right of the test) displays INVALID until the test
is run, then displays RUNNING, STOPPED, PASSED or FAILED.
FPGA Used to test the Field Programmable Gate Array.
The test status field (right of the test) displays INVALID until the test
is run, then displays RUNNING, STOPPED, PASSED or FAILED.
Temperature Used to test the Temperature. Sensing Devices.
The test status field (right of the test) displays INVALID until the test
is run, then displays RUNNING, STOPPED, PASSED or FAILED.
AM Mod Used to test AM Modulation.
The test status field (right of the test) displays INVALID until the test
is run, then displays RUNNING, STOPPED, PASSED or FAILED.
FM Mod Used to test FM Modulation.
The test status field (right of the test) displays INVALID until the test
is run, then displays RUNNING, STOPPED, PASSED or FAILED.
To Next Page
Loading...
