2-54 Subject to Export Control, see Cover Page for details.
A. Self Test Screen
When the Self Test Menu is displayed, press the 1 Key to access the Self Test Screen:
Edit Return
Sta rt
SELF TEST
Test Mode: Normal Run
TDM Pass 0 Fail 0
Modulation Pass 0 Fail 0
41 20 29
SCREEN FEATURE FUNCTION
Test Mode Used to select the run mode of the Self Test.
Select: Normal Run (runs Self Test one time)
Loop All (runs Self Test continuously)
TDM Displays the pass/fail status of the TDM (Time-Division Multiplexing)
Self Test.
Each time the test is performed, the fields next to Pass or Fail are
incremented. The fields are cleared if the Self Test is re-initialized.
Modulation Displays the pass/fail status of the Modulation Self Test.
Each time the test is performed, the fields next to Pass or Fail are
incremented. The fields are cleared if the Self Test is restarted.
F1 “Edit” / “Done” Edit Highlights the selected field to be changed or changes the
field value if the field only contains two selections.
Done Ends the Field Edit and saves the new setting / value.
F2 “Return” Displays the Self Test Menu (para 2-2-4).
F5 “Start” / “Stop” / “Esc” Start Initiates the Self Test.
Stop Terminates the Self Test.
Esc Ends the Field Edit, but does NOT save any changes to
the setting or value.
To Next Page
Loading...
