N° Description Quant. Matière Feuille Dimensions
0 Chantier de construction 13mm Depron
1 Couple 11,5mm ABS 2
2 Couple 11,5mm ABS 2
3 Couple 11,5mm ABS 3
4 Couple 11,5mm ABS 3
5 Couple 11,5mm ABS 3
5,1 Couple 21,5mm ABS 3
6 Couple 11,5mm ABS 2
7 Couple 11,5mm ABS 3
8 Couple 11,5mm ABS 2
9 Quille 11,5mm ABS 4
10 Raidisseur de coque 21,5mm ABS 5
11 Raidisseur de pont 21,5mm ABS 4
12 Couple inf. tableau 11,5mm ABS 4
13 Couple sup. tableau 11,0mm ABS 4
14 Côté coque 21,0mm ABS 6
15 Fond coque 21,0mm ABS 7
16 Bas tableau 11,0mm ABS 7
17 Tableau 11,0mm ABS 7
18 Axe 2Pièce finie 7154/30
19 Support d'axe 21,5mm ABS 2
20 Coupleur d'axe 2,3/3mm 2Pièce finie 7034/19
21 Moteur 2Non inclus Art N°7000/40
22 Avant support 13mm CTP 10
23 Arrière support 13mm CTP 10
24 Côté support 23mm CTP 10
25 Raidisseur 2Baguette pin 5*5*314mm
26 Coin de retenue 43mm CTP 10
27 Support de pont arrière 2Profilé ABS 3*3*340mm
28 Support de pont central 2Profilé ABS 3*3*170mm
29 Support de pont avant 2Profilé ABS 3*3*123mm
30 Support batterie 11,5mm ABS 2
31 Support servo 11,5mm ABS 3
32 Tube de gouvernail 2Pièce finie Dans 7024/10
33 Gouvernail 2Pièce finie Dans 7024/10
34 Guignol simple 1Pièce finie 7492/11
No. Description Quant. Material Sheet Dimensions
59 Searchlight lens 2 1.0 mm VIVAK 11
60 Step tread 1 0.5 mm nickel-silver Etched
61 Step tread 3 0.5 mm nickel-silver Etched
62 Railing stanchion 8 1.5 x 80 mm NS wire Overlength
63 Handrail 2 1.5 x 230 mm NS wire Overlength, bend to shape
64 Step side rail 2 1.5 mm ABS 2
64.1 Step side rail 2 1.5 mm ABS 2
65 Step tread 6 0.5 mm nickel-silver Etched
66 Platform 2 0.5 mm nickel-silver Etched
67 Handrail 4 1.5 x 195 mm NS wire Overlength, bend to shape
68 Bollard cover 12 1.0 mm ABS 9
69 Bollard post 12 20 x 4.0 x 3.0 mm Plastic tube
70 Bollard base 6 1.0 mm ABS 9
71 Weather shield vertical frame 1 1.0 mm ABS 9
72 Weather shield horizontal frame 1 1.0 mm ABS 9
73 Weather shield front centre 1 1.0 mm ABS 9 Engraved bend line
74 Weather shield front top 1 1.0 mm ABS 9 Engraved bend line
75 Weather shield front side 2 1.0 mm ABS 9
76 Weather shield side 2 1.0 mm ABS 9
77 Weather shield top side 2 1.0 mm ABS 9
78 Handrail 2 1.5 x 55 mm NS wire Overlength, bend to shape
79 Instrument panel 1 1.0 mm ABS 9
80 Instrument panel in-fill piece 1 1.0 mm ABS 9
81 Instrument panel fairing 1 1.0 mm ABS 9
82 Instrument panel bezel 1 0.5 mm nickel-silver Etched
83 Instrument decal sheet 1 Decal sheet
84 Front / rear floor panel 2 1.5 mm ABS 5
85 Retaining lug 8 1.5 mm ABS 5
86 Deckhouse frame 1 1.5 mm ABS 5
87 Screw 8 2.2 x 6.5 mm 7768/21 (8 required)
88 Deckhouse partition 1 1.5 mm ABS 5
89 Deckhouse rear wall 1 1.5 mm ABS 5
90 Deckhouse side wall 2 1.5 mm ABS 4
91 Deckhouse front centre 1 1.0 mm ABS 2
92 Deck house front side 2 1.0 mm ABS 2 Engraved
93 Reinforcement 2 1.5 mm ABS 5
94 Front centre window 1 1.0 mm ABS 9 Engraved bend line
95 Front side window 2 1.0 mm ABS 9
96 Centre cover panel 1 1.0 mm ABS 9 Engraved bend line
97 Side cover panel 2 1.0 mm ABS 9
98 Roof frame 1 1.5 mm ABS 4
99 Roof 1 1.5 mm ABS 5
100 Upper side window 2 1.5 mm ABS 4
101 Side roof 2 1.5 mm ABS 4
102 Side top 2 1.5 mm ABS 4 Two-part, engraved
103 Roof 1 1.0 mm ABS 9
104 Front skylight 1 1.5 mm ABS 4 Three-part, engraved
105 Front side skylight 2 1.5 mm ABS 4
106 Lamp bracket bottom 2 1.0 mm ABS 9
107 Lamp bracket inside panel 2 1.0 mm ABS 9
108 Lamp bracket rear panel 2 1.0 mm ABS 9
109 Hatch cover 1 1.5 mm ABS 4
110 Door 1 1.5 mm ABS 3
111 Door hinge 4 0.5 mm nickel-silver Etched
112 Hinge band 2 0.5 mm nickel-silver Etched
113 Hinge pin 1 1.5 x 55 mm NS wire Overlength, bend to shape
114 Door handle escutcheon 2 0.5 mm nickel-silver Etched
To Next Page
Loading...
