6 7
Place the unit as high as possible to ensure the best purification.
(On top of a bookshelf, high cabinet, etc.)
Suggested locations listed in the order of preference:
1. Nearest the source of the worst pollution
2. Near a cold-air return to thoroughly circulate the benefits of
your EcoSphere throughout the area
3. In the area most heavily used to achieve maximum benefit
NOTE:
• The back of the unit should always have at least one inch of
open area to allow unrestricted airflow
• Point the unit towards the center of the room for maximum
dispersion of ions
• To prevent injury, be sure the power cord is not accessible
to small children
The LCD Screen is used to display all current settings (see above) as well as any maintenance reminders.
LCD SCREEN BACKLIGHT
As adjustments are being made, the LCD screen backlight will brighten and the settings on the screen will
change. After 3 seconds without change, the backlight will return to normal.
If a maintenance reminder or
a service reminder appears,
the backlight will brighten
and constantly flash until the
Reminder Reset button is
pressed or the service problem
is corrected.
Purifier Setting
Fan Speed
Reminders
(normally blank - reminders appear here
when unit needs maintenance)
PLACEMENT OF UNIT
LCD DISPLAY
To Next Page
Loading...
