AES EPIC 1D - 3.4 ADJUSTMENTS AND SETTINGS (ADVANCED MENU); M01 UTILITY; CHANGE LANGUAGE; CHANGE M01 START DELAY

1110
EPIC 1DEPIC 1D
3.4 ADJUSTMENTS AND SETTINGS (ADVANCED MENU)
ACCESS TO FUNCTION MODIFIED PARAMETERS
>M01 UTILITY
M02 GENERAL
LANGUAGE
Language selection
START DELAY
Control panel switch-on delay after restart (in sec.)
MANUAL KEYPAD
Possibility of operating the “MAN” button in stable or
unstable mode
ON: unstable
OFF: stable
M01 UTILITY
CHANGE LANGUAGE
LINGUA
>ENG
M01 UTILITY
>LANGUAGE
>EXIT
M01 UTILITA’
>LINGUA
>LINGUA
ITA
LINGUA
>ITA
CHANGE START DELAY
START DELAY
>102 SEC
M01 UTILITY
>START DELAY
>EXIT
M01 UTILITY
>START DELAY
>START DELAY
002 SEC
START DELAY
>002 SEC
Installation Installation
ACCESS TO ADVANCED MENU
54321
ON
DIP-SWITCH 2
The control panel is set as standard with the dip-switch
2 in the “OFF” position. To access the “ADVANCED
MENU” and modify the various parameters, switch
off the control panel and set dip-switch 2 to “ON”.
Then turn the control panel back on to display the
message on the “ADVANCED MENU” on the display.
>SETTING
>PARAMETERS [OK]
SETTING PARAMETERS
To access the advanced menu and set the various
parameters, enter confirmation. On the display will appear
in cascade all the fuctions. To enter each individual function,
select it with the arrows and enter the confirmation button.
EXIT M06 PROGRAM
M01 UTILITY M07 SENSOR
M02 GENERAL M08 TIMER
M03 NET CONTROL EXIT
M04 PUMP 1
CONFIRM MODIFICATIONS AND EXIT FROM ADVANCED MENU (EXAMPLE)
LANGUAGE
>ENG
M01 UTILITY
>LANGUAGE
>M01 UTILITY
LANGUAGE
>M01 UTILITY
M02 GENERAL
>EXIT
M01 UTILITY
>SETTING
>PARAMETER [OK]
54321
ON
DIP-SWITCH 2
Once the setting of the various parameters has been
confirmed (for example the LANGUAGE parameter), to
exit the “ADVANCED MENU” bring the dip-switch 2
back to the “OFF” position.