Need help?Do you have a question about the AES EPIC 1D and is the answer not in the manual?
General| Brand | AES |
|---|---|
| Model | EPIC 1D |
| Category | Control Panel |
| Language | English |
General safety warnings covering electric shock and risks to people and property.
Specific cautions for pump operation, electrical connections, and service procedures.
Instructions for physically mounting the control panel securely to a support.
Guidance on connecting the unit to the main power supply and grounding.
Instructions for connecting the motor power supply and ensuring correct rotation.
Initial setup process including language selection and pump data self-learning.
How to make the control panel operational after the self-learning phase.
Accessing and modifying advanced control panel parameters via an advanced menu.
Adjustments for utility settings like language selection and start delay.
Procedure to change the display language of the control panel.
Procedure to adjust the control panel switch-on delay after restart.
Procedure to change the 'MAN' button operating mode between stable and unstable.
General settings related to pump start and stop delay parameters.
Procedure to adjust the pump start delay parameter.
Procedure to adjust the pump stop delay parameter.
Settings for network parameters including voltage and frequency.
Procedure to set the nominal operating voltage for the system.
Procedure to set the maximum allowable voltage for protection.
Procedure to set the nominal operating frequency for the system.
Procedure to set the minimum allowable voltage for protection.
Procedure to set the operational frequency range for the system.
Configuration settings specific to Pump 1 operation.
Option to re-run the pump data self-learning procedure.
Setting the minimum amperage for dry running protection.
Setting the maximum amperage for overcurrent protection.
Setting the nominal operating current for the pump.
Setting the maximum number of pump starts allowed per hour.
Programming options for operation mode (empty/fill) and water type.
Explanation of the self-holding function for waste water applications.
Procedure to select the operation mode: emptying or filling.
Procedure to select the water type: potable or waste water.
Configuration of the self-holding parameter for automatic pump control.
Configuration for remote emergency start/stop via BMS.
Using the control panel with 4-20 mA sensors or pressure transducers.
General settings for sensor parameters, including unit of measure.
Setting the full scale value for the connected sensor.
Setting the minimum level threshold for sensor input.
Setting the maximum level threshold for sensor input.
Setting the trigger point for Pump 1 to start based on sensor input.
Setting the trigger point for Pump 1 to stop based on sensor input.
Configuration settings for pump operation timers.
Setting the ON and OFF durations for the pump operation timer.
Setting the ON duration for Timer T1 in minutes.
Setting the OFF duration (pause) for Timer T1 in minutes.
Manual adjustment of threshold protections using internal trimmers.
Adjusting probe sensitivity (CLC and water in oil sensor).
Explanation of control panel buttons and indicator lights functionality.
Description of indicator lights: PW (Power), ALARM (Red), START (Green).
List and description of all possible alarms and their operational impact.
Procedures and behavior when an alarm causes the pump to stop.
Procedure to delete active alarms from the control panel.
Diagrams illustrating common installation configurations with various sensors.
Methods for stopping the pumps using manual or automatic commands.
General information regarding service and maintenance procedures.
Guidelines for identifying and ordering correct spare parts.
Instructions for the correct disposal of the control panel and its components.
Declaration of conformity with European directives and harmonized standards.
To Next Page
