9
TOOLS INCLUDED:
F Phillips Screwdriver
F 6mm L Wrench
F 5mm L Wrench
F 5mm T Wrench
F 13/15mm Flat Wrench
PARTS INCLUDED:
F 1 Console
F 1 Console Mast
F 1 Water Bottle Holder
F 1 Main Frame
F 1 Front Stabilizer Tube
F 1 Base Rail
F 2 Footpads
F 1 Audio Adaptor Cable
F 1 iPod® Dock Rubber Plug
F 2 Crank Caps
F 2 Upper Handlebars
F 2 Lower Handlebars
F 2 Swing Arms
F 2 Link Arms
F 2 Pedal Arms
F 2 Rear Uprights
F 2 Top Hand Rails
F 1 AC Adaptor Cable
F 1 Universal MP3 Player Dock Insert
F 1 Polar
®
Chest Strap
UNPACKING
Unpack the product where you will be using it. Place the elliptical carton on a level
flat surface. It is recommended that you place a protective covering on your floor.
Never open box when it is on its side.
NOTE: During each assembly step, ensure that ALL nuts and bolts are in place
and partially threaded in before completely tightening any ONE bolt.
NOTE: A light application of grease may aid in the installation of hardware. Any
grease, such as lithium bike grease is recommended.
If you have questions or if
there are any missing parts,
contact Customer Tech
Support. Contact information
is located on the back panel
of this manual.
NEED HELP?
PRE ASSEMBLY
To Next Page
Loading...
