AFG 18.1AXT - Step-by-Step Assembly Instructions

10
ASSEMBLY STEP 1
A Open HARDWARE FOR STEP 1.
B Attach the FRONT STABILIZER TUBE to
the MAIN FRAME using 4 BOLTS (A) and 4
WASHERS (B).
C Attach the BASE RAIL to the MAIN FRAME
using 4 BOLTS (A) and 4 WASHERS (B).
BOLT (A)
20 mm
Qty: 8
FLAT WASHER (B)
20 mm
Qty: 8
HARDWARE FOR STEP 1:
BOLTS (A)
FLAT WASHERS (B)
BASE RAIL
FRONT STABILIZER TUBE
MAIN FRAME